Using The Talking Caller Id (Base Only); Viewing Caller Id Information - Radio Shack 43-140 Owner's Manual

Beyond.the.Basics
Using.the.Talking.Caller.ID.(Base.Only)
The Talking Caller ID feature is a Caller ID that Talks and verbally
announces from the base the name of incoming callers when you
receive a call. To use this feature, you must subscribe to Caller
ID service from your telephone company and you must have the
TALKINg CALLER ID switch set to on.
Viewing.Caller.ID.Information
With a Caller ID subscription from your local telephone company,
you have two different ways to view Caller ID information. The
first way is to look at your cordless handset or base unit when
you receive an incoming call. The second is to view your Caller ID
history list. To view your CID list, follow these steps:
1. With the phone in standby, press CID. The summary screen
appears. The screen shows the number of new messages and
total messages.
2. To view the Caller ID information in historical order (from new
to old or from old to new), use RINg/VOL/
handset (SELECT/
from the latest to the earliest, or RINg/VOL/
handset (SELECT/
messages.
3. To finish viewing the CID information, press CID.
While viewing Caller ID information from your CID list, you may
notice that a number will appear next to the received time of
some Caller ID information. This indicates the number of times
that you have received a call from that number. Once you view
the information, the number will be cleared.
While viewing or deleting Caller ID information, if you do not
press a key within 30 seconds, an error tone will sound and your
phone will return to standby. Also, if you receive an incoming
call or intercom page while viewing Caller ID information, your
operation will be canceled allowing you to answer the call or
intercom page.
UC044ZH_43-140_OM5.indd 48
on the base) to scroll through the data
on the base) to scroll back through the

on the cordless
on the cordless
12/18/2006 3:34:02 PM