Storing Caller Id Information To Speed Dial Locations - Radio Shack 43-140 Owner's Manual

Beyond.the.Basics
Storing.Caller.ID.Information.to.Speed.Dial.
Locations
Caller ID names & numbers shown in the Caller ID list can be
stored to a speed dial location.
For instructions on viewing the Caller ID information, see page
48. If the Caller ID information did not include the phone number,
then you will not be able to store it.
Follow these steps to store a Caller ID name and number to a
speed dial location:
1. With the phone in standby, press CID. Select the phone
number to be stored from the Caller ID list by pressing
RINg/VOL/
2. Press MEM.
3. Enter a number 0-9 or press RINg/VOL/
select the memory location to be stored.
4. Press SELECT/INT'COM. You will hear a confirmation tone,
and the number is stored in memory. The display returns to
the Caller ID data.
If a message has already been stored in the selected
memory number location, a confirmation screen is
NOTE
displayed. Press RINg/VOL/
SELECT/INT'COM to overwrite. The display returns
to the Caller ID data.
UC044ZH_43-140_OM5.indd 33
or RINg/VOL/ .

or RINg/VOL/
to select YES. Press
to
12/18/2006 3:33:59 PM