Traveling Out Of Range; Selecting A Different Channel; Finding The Lost Handset; Placing A Call On Hold From The Base - Radio Shack 43-140 Owner's Manual

Beyond.the.Basics
Traveling.Out.of.Range
During a call, if you move your cordless handset too far away
from your base, noise may increase. If you pass the range limits
of the base, your call will terminate within one minute.
Selecting.a.Different.Channel
If you encounter interference while using your cordless handset,
you can manually change the handset's channel for clear
operation. While using your handset, press DEL/CH. SCANNING
appears on the display, indicating the handset is changing to
another channel.
Finding.the.Lost.Handset
If you misplace the cordless handset, press PAgE/HOLD on the
base. The visual ringer on the cordless handset flashes, and the
cordless handset will beep for 60 seconds.
To cancel a find handset page, press PAgE/HOLD on the base.
Paging is also canceled when the phone receives an incoming
call.
Placing.a.Call.on.Hold.from.the.Base
1. During a call from the base, press PAgE/HOLD. The call will
be put on hold.
2. To return to the call, press PAgE/HOLD again, pick up the
corded handset or press TALK on the base.
To talk to the caller from the cordless handset, press TALK on
the cordless handset.
•
NOTES
•
UC044ZH_43-140_OM5.indd 42
You can place a call on hold for ten minutes. When
ten minutes has passed, the call is disconnected,
and the phone automatically returns to standby.
You can return the corded handset to the base
while a call is on hold, and the call will remain on
hold.

12/18/2006 3:34:01 PM