Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Repair Parts
owners
manual
model no.
45-0350 (aTV)
45-0351 (Farm)
CAUTION:
Read Rules for
Safe Operation
and Instructions
Carefully
PRINTED IN USA
™
ImPorTanT!
The wheel bearings are not pre lubricated.
The wheel hubs must be filled with grease after
the wheels are assembled to the axle.
• Safety
• Assembly
• Operation
• Maintenance
• Parts
the fastest way to purchase parts www.speedepart.com
(45-0350 sHown)
TanDem aXle CarT
FORM NO. 48902 (4/25/07)
Advertisement
Table of Contents
Related Manuals for Agri-Fab 45-0350
Summary of Contents for Agri-Fab 45-0350
- Page 1 ™ owners manual model no. 45-0350 (aTV) 45-0351 (Farm) (45-0350 sHown) TanDem aXle CarT ImPorTanT! CAUTION: The wheel bearings are not pre lubricated. Read Rules for The wheel hubs must be filled with grease after the wheels are assembled to the axle.
-
Page 2: Safety Rules
Refer also to the slope guide on page 9 of this manual. stay off steep slopes! 10. Do not tow this cart on highways or on public thoroughfares. 11. Follow maintenance and lubrication instructions as outlined in this manual. CarTon ConTenTs model 45-0350 only 1. Tailgate Guides (2) 8. Front Panel 2. Corner Caps (2) 15. -
Page 3: Table Of Contents
SHOWN FULL SIZE NOT SHOWN FULL SIZE HarDware PaCK ref. Description 45-0350 45-0351 ref. Description 45-0350 45-0351 Hex Bolt, 5/16-18 x 4" 1" Thin Washer, (8 pcs. extra) Curved Head Bolt 1" Thick Washer Hex Bolt, 3/8" x 1" Spring Truss Hd. -
Page 4: A Hex Bolt, 5/16-18 X 4
assemBlY InsTruCTIons 5. Position the tailgate reinforcement bracket on outside of cart as shown in figure 3. Assemble to the bottom of the cart body using four 5/16" x 3/4" truss head bolts Tools reQuIreD For assemBlY and 5/16" nylock nuts. Do not tighten yet. See figure Screwdriver Pliers 6. -
Page 5: E Hex Bolt, 1/4" X 3/4
1/4" x 5/8" hex bolts and 1/4" nylock nuts per axle through the wheel support and the tongue. See cap. leave out the rear bolt if the cart has top rails figure 7. (model 45-0350 only). TIGHTen. See figure 5. AXLE 1/4" x 5/8" 1/4" x 5/8"... -
Page 6: F Hex Bolt, 1/4" X 5/8
17. Place the latch lock lever through the slot in the tongue. 19. Assemble the end of the hitch bracket (two holes) up Insert the 5/16" x 4" hex bolt through one side of the through the slot at the front of the drawbar tongue. tongue. - Page 7 - moDel 45-0350 onlY 22. Assemble a 1" thin washer, a spacer, a 1" thick washer (model 45-0350 only), a wheel with the valve stem facing out, and another 1" thin washer onto a wheel axle. Insert 29. Assemble seven rail braces to the top flange on the a cotter pin into the axle and spread the ends.
- Page 8 Use extra caution when operating on slopes. 7. Operate at reduced speed when towing a load. Tires: 16.00" x 6.5" Turf Tread 8. The 45-0350 cart should not exceed 20 m.p.h., or your axle: 1.0" Dia. High Carbon Steel vehicle's maximum safe towing speed, whichever is Capacity: Up to 1000 Lbs.
- Page 9 sloPe GuIDe For TraCTors (Keep this sheet in a safe place for future reference.) use this guide to determine if a slope is safe for the operation of your tractor and cart. refer also to the instructions in your vehicle owners manual.
- Page 10 ParTs For CarT moDel no's. 45-0350, 45-0351 MODEL NO. 45-0350 ONLY...
- Page 11 ParTs For CarT moDel no's. 45-0350, 45-0351 REF. PART DESCRIPTION 45-0350 45-0351 25112 Cart Body 23502 Tailgate 62458 Tailgate Reinforcement Bracket 23548 Tailgate Guide 23492 Front Panel 25106 Wheel Support 24497 Latch Stand Bracket 24498 Latch Lock Lever 23014...
- Page 12 Agri-Fab, Inc. Unauthorized uses and/or reproductions of this manual will subject such unauthorized user to civil and criminal penalties as provided by the United States Copyright Laws.