Table of Contents
Advertisement
Quick Links
OwNERS
MANUAl
Model No.
45-02175
CAUTION:
Read Rules for
Safe Operation
and Instructions
WMV-
Digitally signed by WMV-Dresden
PRINTED IN USA
DN: cn=WMV-Dresden, c=DE,
o=WMV-Dresden,
Dresden
email=noreply@wmv-dresden.de
Date: 2017.01.26 13:00:49 +01'00'
™
IMPORTANT!
The wheel bearings are not prelubricated.
The wheel hubs must be filled with grease after the wheels
are assembled to the axle.
• Assembly
Carefully
• Operation
• Maintenance
• Repair Parts
the fastest way to purchase parts www.speedepart.com
SUPER 17
ATV CART
FORM NO. 40314 (4/24/07)
Advertisement
Table of Contents
Related Manuals for Agri-Fab SUPER 17
Summary of Contents for Agri-Fab SUPER 17
- Page 1 ™ OwNERS MANUAl Model No. 45-02175 SUPER 17 ATV CART IMPORTANT! The wheel bearings are not prelubricated. The wheel hubs must be filled with grease after the wheels CAUTION: are assembled to the axle. Read Rules for Safe Operation and Instructions •...
- Page 2 SAFETY RUlES Remember, any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when using power equipment. CAUTION: VEHIClE BRAKING AND lOOK FOR THIS SYMBOl TO POINT OUT STABIlITY MAY BE AFFECTED wITH THE IMPORTANT SAFETY PRECAUTIONS.
-
Page 3: Table Of Contents
HARDWARE SHOWN FULL SIZE Not Shown Full Size HARDwARE PACK REF. DESCRIPTION QTY. Hex Bolt, 5/16" x 3-3/4" Hex Bolt, 5/16" x 3/4" Hex Nut, 5/16" (SEMS) Hex Bolt, 1/4" x 3/4" Hex Bolt, 3/8" x 1" Slt. Truss Hd. Bolt, 5/16" x 3/4" Lg. Nylock Nut, 1/4"... -
Page 4: A Hex Bolt, 5/16" X 3-3/4
ASSEMBlY INSTRUCTIONS 5. Position the tailgate reinforcement bracket on outside of cart as shown in figure 2. Assemble to the bottom of TOOlS REQUIRED FOR ASSEMBlY the cart body using four 5/16" x 3/4" truss head bolts Screwdriver and 5/16" nylock nuts. Do not tighten yet. See figure Pliers 7/16"... -
Page 5: B Hex Bolt, 5/16" X 3/4
9. Assemble the front panel over the end of the cart using 12. Turn the latch stand bracket so that the aligning tab is six 1/4" x 3/4" hex bolts and 1/4" nylock nuts as shown at the rear (bottom) of the bracket. Assemble the latch in figure 4. -
Page 6: E Hex Bolt, 3/8" X 1
14. To prevent accidental tipping during the following 18. Place the latch lock lever through the slot in the tongue assembly procedures, lower the cart to rest upside down as shown in figure 10. Assemble the 5/16" x 3-3/4" hex on its top flanges, so that the wheel support is facing bolt through the tongue, the lever and two 5/16"... -
Page 7: J Flat Washer, 1/2
20. Assemble a short spacer tube, a 1" flat washer, a wheel (valve stem facing out), and another 1" flat washer onto the axle. Secure with a cotter pin, spreading the ends so that a hub cap can fit over the pin. Assemble the hub cap by pressing it onto the flat washer. - Page 8 OPERATION MAINTENANCE CAUTION: VEHIClE BRAKING AND 1. At the beginning of each season, using a light machine STABIlITY MAY BE AFFECTED wITH THE oil, lubricate the latch, the latch pivot bolt, and the area ADDITION OF AN ACCESSORY OR AN of the axle where the draw bar tongue pivots .
- Page 9 SlOPE GUIDE (Keep this sheet in a safe place for future reference.) Use this guide to determine if a slope is safe for the operation of your tractor and cart. Refer also to the instructions in your vehicle owners manual.
- Page 10 REPAIR PARTS FOR CART MODEl 45-02175...
- Page 11 REPAIR PARTS lIST FOR CART MODEl 45-02175 REF. PART DESCRIPTION Quantity 23984 Cart Body 23504 Tailgate 62457 Tailgate Reinforcement Bracket 23548 Guide, Tailgate 23490 Front Panel 23487 Wheel Support 24757 Latch Stand Bracket 24498 Latch Lock Lever 23014 Hitch Bracket 24756 Tongue (Draw Bar) 24462...
- Page 12 Agri-Fab, Inc. Unauthorized uses and/or reproductions of this manual will subject such unauthorized user to civil and criminal penalties as provided by the United States Copyright Laws.
Need help?
Do you have a question about the SUPER 17 and is the answer not in the manual?
Questions and answers