Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Repair Parts
Agri-Fab ®
OWNERS
MANUAL
Model No.
45-0350
(ATV)
45-0351
(FARM)
CAUTION
Read Rules for
Safe Operation
and Instructions
Carefully
(45-0350
SHOWN)
TANDEM
AXLE CART
• Safety
• Assembly
• Operation
• Maintenance
• Parts
PRINTED
IN USA
SpeedEPart the _ as_es_
wa_ to purchase
pa_t_
www.speedepart.com
FORM NO. 48902 (REV. 1/04)
Advertisement
Table of Contents
Related Manuals for Agri-Fab 45-0351
Summary of Contents for Agri-Fab 45-0351
- Page 1 Agri-Fab ® OWNERS MANUAL Model No. 45-0350 (ATV) 45-0351 (FARM) (45-0350 SHOWN) TANDEM AXLE CART CAUTION Read Rules for Safe Operation and Instructions Carefully • Safety • Assembly • Operation • Maintenance • Parts SpeedEPart the _ as_es_ wa_ to purchase pa_t_ www.speedepart.com...
- Page 2 SAFETY RULES Remember, any power equipment can cause injury if operated improperly or if the user does not understand to operate the equipment. Exercise caution at all times when using power equipment. CAUTION: VEHICLE BRAKING IMPORTANT SAFETY PRECAUTIONS. THE ADDITION OF AN ACCESSORY MEANS-- ATTENTION! BECOME ALERT!
-
Page 3: Table Of Contents
SHOWN FULL SIZE NOT SHOWN FULL SIZE HARDWARE PACK 45-0350 45-0351 Ref. 45-0350 45-0351 Ref. Description Description Lock Washer, 3/8" Hex Bolt, 5/16-18 x 4" Curved Head Bolt Flat Washer, 1/4" Flat Washer, 5/16" Hex Bolt, 3/8" x 1" Truss Hd. Bolt, 5/16" x 3/4"... -
Page 4: A Hex Bolt, 5/16-18 X 4
1/4" x 1/2" HEX BOLT 1/4" SEMS NUT position. A falling cart can cause personal injury! HEX BOLT (45-0351 only) Pay close attention to the stability of the cart while it remains in an upright position. For best stability, 5116"... -
Page 5: Rail
10. Assemblethe front paneloverthe end of the cart 14. Assemble the wheel support to the cart using eight usingsix 1/4"x 1/2"hexboltsand1/4"SEMSnuts 5/16" x 3/4" truss head bolts and 5/16" SEMS nuts as shown in figure 4. Leave two holes in the as shown in figure 6. -
Page 6: F Hex Bolt, 1/4" X 1/2
Assemble the end of the hitch bracket (two holes) 17. Hold the latch lock lever as shown in figure 8 and place it down through the slot in the draw bar tongue. up through the slot at the front of the drawbar Assemble the 5/16"... -
Page 7: Spacer
22. Assemblea 1" thin washer,a spacer,a 1" thick ASSEMBLING RAILS - MODEL 45-0350 ONLY washer (model 4 5-0350 only),a wheelwiththevalve stemfacingout, andanother1" thinwasherontoa 29. Assemble seven rail braces to the top flange on the wheelaxle. Insert a cotter pin into the axle and sides and the front of the cart bed. -
Page 8: Bearing 4
Up to 1000 Lbs. Max. ever is less. Refer to your vehicle operator's manual. Approx. Sh. Wt. 195 Lbs. The 45-0351 cart should not exceed 10 m.p.h., or your vehicle's maximum safe towing speed, which- ever is less. Refer to your vehicle operator's manual. - Page 9 UJ _._=_ •_ 0 "- UJ sF_ .'2_0 --_ .,-.' CAUTION: DO NOT OPERATE YOUR TRACTOR AND CART ON A SLOPE IN EXCESS OF 10 DEGREES. BE SURE OF YOUR u) u) ._ -_ TRACTOR'S TOWING BRAKING CAPABILITIES BEFORE .,., =.. OPERATING ON A SLOPE.
- Page 10 REPAIR PARTS FOR CART MODEL NO'S. 45-0350, 45-0351 MODEL NO. 45-0350 ONLY 23" _ 24 _ 26 ..v '14 \15...
- Page 11 Latch Lock Lever 23014 Hitch Bracket 25114 Draw Bar Tongue 25107 Axle, 1" Dia. 23484 Front Corner 43594 Wheel, 16/6.5" x 8.00 (45-0351) 48906 Wheel, 18/9.5" x 8.00 (45-0350) 43093 Cotter Pin, 1/8" Dia. x 1-1/2" * 43601 Washer, Flat 1" (Thin)
- Page 12 $#eedEPmrt_ _ _ to _ www.speedepart.com REPAIR PARTS Agri-Fab, Inc. 303 West Raymond Sullivan, IL. 61951 217-728-8388 www.agri-fab.com...