Chapter 5. Tuning The Commands To Your Voice - Panasonic DBS576 Section 770 User Manual

Chapter 5. Tuning the Commands to Your
To tune the system to your voice, you must speak the following commands:
COMMANDS: Add, Back Space, Cancel, Call, Change, Complete, Delete,
Delete All, Go Back, List, Name, No, Number, Program, Reset, Repeat,
System, Train, Yes
For these spoken commands to be recognized by the system, a reference
vocalization of each of these commands is prerecorded in the system.
However, because the reference vocalizations are for non-specific users, they
may not be suitable for every user. In other words, the system may recognize
a command spoken by one user but not by another. You can therefore choose
to override the existing prerecorded reference vocalizations by recording your
own reference vocalizations for some commands or all of them in the system.
We also recommend recording your own reference vocalizations to ensure
smooth operation of the voice recognition phone.
The command to be registered should be the same as the original one.
Notes: • Once you have recorded your own reference vocalizations, you
NAME TO CALL ?
GO BACK
READY CALL
PROGRAM CHANGE
PROGRAM SYSTEM
ADD DELETE ALL
26
Voice
cannot restore the prerecorded reference vocalizations without
resetting this system.
In this case, all the contents of the phonebook will be cleared.
• If you do not hear Voice Guidance in response to saying "Go Back,"
"Program," "System," "Train," "Yes," or "No," press Soft Key
[EXEC] or Soft Key [END] next to the characters on the screen.
1. Lift the handset and listen for the dial tone.
2. Press the START/END (FF12 Key).
The dial tone stops and Voice Guidance asks "Call Who?"
Note: If no names or telephone numbers have been stored in the
Phonebook, the TOP MENU is displayed.
3. Say "Go Back."
The TOP MENU is displayed and Voice Guidance responds
with "Ready."
4. Say "Program."
Voice Guidance responds with "Which mode?"
DBS 576 - Issued 3/23/98 576-10-770