BMW 525i Owner's Manual page 162

Adapting TeleService or
BMW Assist
Displaying and updating services
If the offering from TeleService or BMW
Assist changes, you will be informed of
this. In this case you should update the ser-
vices.
Control Center, for principle details, refer to
page 16:
1. Open the start menu
2. Press the controller to open the
3. Select "Communication interface" and
press the controller
4. Select "BMW Service settings" and
press the controller
5. Select "Service Status" and press the
controller.
You will be informed about the current
scope of TeleService or BMW Assist.
These services are enabled
6. Select "Update services" and press the
controller.
Roaming
To be able to use the services of Tele-
Service or BMW Assist in other countries
as well, these must be supported by the
foreign providers.
In addition, the services offered must be
transmitted to your vehicle. You can do this
in the following ways:
Update services
>
Switch on roaming.
>
The offering of the foreign services will
be automatically transferred. This can
result in additional costs.
160
Switching on roaming:
1.
2.
3.
4.
5.
6.
menu
Terminating services
If you terminate the services, your vehicle
will not be equipped to contact the BMW
Assist call center. When an emergency call
is initiated, the telephone connection to the
general emergency number is established.
Control Center, for principle details, refer to
page 16:
1.
2.
3.
4.
5.
6.
The automatic service notification can be
disabled separately. Please contact your
BMW center for this purpose.
Enable TeleService and, if applicable,
BMW Assist once again to log on again.
Online Edition for Part No. 01 41 0 158 159 - © 02/04 BMW AG
Open the start menu
Press the controller to open the
Select "Communication interface" and
press the controller
Select "BMW Service settings" and
press the controller
Select "Profile" and press the controller
Select "Roaming" and press the con-
troller.
Roaming is enabled.
Open the start menu
Press the controller to open the
Select "Communication interface" and
press the controller
Select "BMW Service settings" and
press the controller
Select "Service Status" and press the
controller
Select "Terminate services" and press
the controller.
The use of TeleService or BMW Assist
is blocked. To deactivate the blocking
function, enabling must be carried out
again, refer to page 157. This does not
affect the contractual agreements.
menu
menu