Brake System - BMW 525i Owner's Manual

3. The coolant level is correct when the
coolant extends to between the MIN
and MAX marks, refer to the diagram
adjacent to the filler neck
4. If the coolant is low, slowly add coolant
up to the specified level – do not overfill
5. Close the cap tightly
6. Have the reason for the coolant loss
eliminated as soon as possible.

Brake system

Malfunction
Brake fluid
The warning lamp lights up in spite
of the handbrake being released; a
message appears on the Control
Display:
Stop immediately.
The brake fluid in the reservoir has fallen to
below the minimum level. At the same time,
a considerably longer brake pedal travel
may be noticeable. Have the system
checked by a BMW center immediately.
Display of the previously described
malfunction on Canadian models.
When you continue driving, an
increased brake pedal path can be
necessary, and significantly longer braking
distances might be required. Please adapt
your driving style accordingly.<
Brake pads
The warning lamp lights up in spite
of the handbrake being released; a
message appears on the Control
Display. The brake pads have reached their
minimum pad thickness. Have brake pads
replaced immediately.
Display of the previously described
malfunction on Canadian models.
176
particular vehicle model. As BMW cannot
assess the suitability of other brake pads
for use on your vehicle, we are unable to
assume continued responsibility for the
vehicle's operating safety if non-approved
pads are
Online Edition for Part No. 01 41 0 158 159 - © 02/04 BMW AG
For your own safety: use only brake
pads that BMW has approved for your
installed.<