Operation - Makita PV7001C Instruction Manual

OPERATION
Polishing operation by sponge pad
CAUTION:
Always wear safety glasses or a face shield during operation.
In general, keep the sponge pad at an
angle of about 15" to the workpiece sur-
face.
CAUTION:
The sponge pad must be used only.
Polishing operation by wool bonnet
CAUTION:
Always wear safety glasses or a face shield
In general, keep the wool bonnet at an
angle of about 15" to the workpiece sur-
face.
CAUTION:
Excessive pressure will result in poor per-
formance and premature wear to the wool
bonnet.
during operation.
Sanding operation
CAUTION:
Always wear safety glasses or a face shield during operation
In general, keep the abrasive disc at an
angle of about 15" to the workpiece sur-
face.
Apply slight pressure only. Excessive pres-
sure will result in poor performance and
premature wear to the abrasive disc.
CAUTION:
Never run the tool without the abrasive
disc.
You may seriously damage the pad.
10