Makita PV301D Instruction Manual
Cordless sander polisher
Hide thumbs
Also See for PV301D:
- Instruction manual (93 pages) ,
- Instruction manual (88 pages) ,
- Instruction manual (89 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita PV301D
Summary of Contents for Makita PV301D
- Page 1 INSTRUCTION MANUAL Cordless Sander Polisher PV301D Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: PV301D Maximum capacities Wool pad 80 mm Sponge pad 80 mm Sanding disc 50 mm Backing pad diameter For sanding 46 mm For polishing 75 mm Rated speed (n) / 0 - 9,500 min High (2 No load speed (n... -
Page 3: Ec Declaration Of Conformity
Electrical safety Vibration Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs The vibration total value (tri-axial vector sum) deter- with earthed (grounded) power tools. Unmodified plugs mined according to EN60745-2-3: and matching outlets will reduce risk of electric shock. - Page 4 Always wear protective goggles to protect your eyes Battery tool use and care from injury when using power tools. The goggles Recharge only with the charger specified by must comply with ANSI Z87.1 in the USA, EN 166 in the manufacturer. A charger that is suitable for Europe, or AS/NZS 1336 in Australia/New Zealand.
- Page 5 The outside diameter and the thickness of your Kickback and Related Warnings accessory must be within the capacity rating Kickback is a sudden reaction to a pinched or snagged of your power tool. Incorrectly sized accessories rotating wheel, backing pad, brush or any other acces- cannot be adequately guarded or controlled.
- Page 6 Do not touch the terminals with any con- causing fires, personal injury and damage. It will ductive material. also void the Makita warranty for the Makita tool and Avoid storing battery cartridge in a con- charger. tainer with other metal objects such as nails, coins, etc.
-
Page 7: Functional Description
Indicating the remaining battery capacity FUNCTIONAL DESCRIPTION Only for battery cartridges with the indicator CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge CAUTION: Always switch off the tool before... - Page 8 Switch action Speed change lever CAUTION: CAUTION: Before installing the battery car- Always set the speed change lever tridge into the tool, always check to see that the fully to the correct position. If you operate the switch trigger actuates properly and returns to tool with the speed change lever positioned halfway the "OFF"...
- Page 9 Hook-and-loop system ASSEMBLY Press in the shaft lock to prevent spindle rotation, and thread the backing pad into the spindle. Hand tighten securely. CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Installing side grip CAUTION: Tighten the caps or side grip...
-
Page 10: Installing Abrasive Disc
Always use the correct sized wheel that is made from OPERATION appropriate abrasive materials with the right grit size for your job. Abrasive disc materials CAUTION: Only use Makita genuine pads for polishing. Abrasive materials Basic features Practical CAUTION: Only use Makita genuine abrasive applications disc for sanding (optional accessories). -
Page 11: General Operation
To maintain product SAFETY and RELIABILITY, cause eye or respiratory diseases. repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service NOTE: First, perform a test waxing on an inconspicu- Centers, always using Makita replacement parts. -
Page 12: Optional Accessories
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.