Utilities - Toshiba Qosmio G30 User Manual

Introduction
Hibernation
Standby

Utilities

This section describes preinstalled utilities and tells how to start them. For
details on operations, refer to each utility's online manual, help files or
readme.txt files.
TOSHIBA Power
Saver
HW Setup
TOSHIBA Controls
1-12
This feature lets you turn off the power without
exiting from your software. The contents of main
memory are saved to the hard disk, when you
turn on the power again, you can continue
working right where you left off. Refer to the
Turning off the power
Getting Started, for details.
If you have to interrupt your work, you can turn off
the power without exiting from your software.
Data is maintained in the computer's main
memory. When you turn on the power again, you
can continue working right where you left off.
To access this power savings management
program, click start, click the Control Panel,
click Performance and Maintenance and click
the TOSHIBA Power Saver icon.
This program lets you customize your hardware
settings according to the way you work with your
computer and the peripherals you use. To start
the utility, click start and click Control Panel,
click Printers and Other Hardware and click the
TOSHIBA HWSetup icon.
This utility lets you do the following:
■
Buttons: Assign applications to the REC,
Brightness down, Brightness up, DOLBY, TV-
out buttons.
section in Chapter 3,
User's Manual