General Operations; Touch Screen; Reset The Unit; Turning The Unit On/Off - Hyundai H-CMD2007 Instruction Manual

Operation

General operations

Touch screen

Due to the touch screen, you can fulfill most
functions not only by pressing buttons but also
by touching the options you need.

Reset the unit

Operating the unit for the first time or after
replacing the car battery, you must reset the
unit. Press RES button on the unit with a
pointed object (such as a ballpoint pen) to set
the unit to initial state.
When some errors occur on the display,
you can also press RES button to resume to
normal, and it will erase the clock setting and
some memorized functions.

Turning the unit on/off

Press PWR/SOURCE button on the RC or
PWR/SRC button on the panel to turn on the
unit. Press and hold the button more than 2
seconds to turn off the unit.

Open the monitor

Press REL button on the unit or
the RC to slant the monitor. Press the button
again, the monitor returns to the previous state.

Angle setting

You can adjust the desired angle of the
monitor. Press and hold REL button till ANGLE
appears on the display. Press VOL+ button
on the panel to adjust monitor backward by
definite angle; press VOL- button on the panel
to adjust the monitor forward.
Please do not adjust the monitor tilt
manually, otherwise it can get damaged.

Night mode

Press and hold MUT button on the panel to
enter the night mode of the display; press it
again to switch to the normal mode.

Volume control

Press VOL+/VOL- buttons on the RC or on
12
the unit to increase/decrease the sound level.

Setting the sound characteristics

Repeatedly press SEL button on the RC
or NAVI/SEL button on the unit to select the
desired parameter in the following order: VOL
=> BALAN => FADE => BASS => TREBL =>
SUBWF. After selecting the desired parameter,
you can adjust its current level by pressing
VOL+/- buttons on the RC or on the unit.

Mute function

Press
button on the unit to turn off the sound. The
corresponding icon appears on the TFT. Press
the button again or adjust volume to resume
the sound output.

Equalizer setting

While listening to music of any kind, you
can select the corresponding preset modes
to adjust the sound quality perfectly by using
AF/EQ button on the RC. Press and hold the
button repeatedly to choose the following
modes in turn: POP => CLAS => ROCK =>
OFF. The default setting is OFF.
button on

Loudness

Press and hold TA/LOUD button on the
RC to activate loudness function. This is to
increase the low frequency, which can improve
sensitivity for your ears. Keep pressing it again
to quit this function.

Mode selection

Repeatedly press PWR/SOURCE button
on the RC or PWR/SRC button on the unit to
select a mode: Radio => DVD => SD Card =>
TV => AUX => USB. Or in any mode touch
SRC item on the screen to display the Main
menu. In the menu, touch the item of the mode
you need to select the corresponding mode.
The DVD, SD Card and USB modes are
only available when corresponding storages
are inserted into the unit. If a mode in the menu
is in cyan font, this mode is not supported by
button on the RC or MUT