Buttons; Auxiliary Functions; Starting Your Machine - Blomberg Dishwasher Instruction Manual

Buttons

On / Off Button (1)
When this button is set to on position,
the display switches on with the last
program used, and when it is set to off
position the indicators on the display
turns off.
Start/Pause/Cancel Button (3)
It is used to start, pause or cancel
the selected program or delayed start
function.
Function Button (4)
Enters into the Auxiliary Functions
menu.
Time Delay Button (5)
Press to make the delay time settings.
Confirmation Button (6)
Used to confirm (store) the selections
in Auxiliary Functions and Settings
Menus.
Selection Buttons (> - < ) (7)
Used to move forward in Program,
Time Delay, Auxiliary Functions and
Settings menus.

Auxiliary Functions

Quick Function (13)
It shortens the time of the washing
cycle selected and decreases water
consumption by enabling washing
under higher pressure.
Silent Function (14)
It provides delicate and quiet washing
by enabling washing under lower
pressure.
Extra Dry Function (15)
It provides superior drying
performance.
Tablet Deterg. Function (16)
This feature provides better drying
performance with the multi-purpose
detergents such as 3in1, 4in1, 5in1,
all in one, etc., depending on the
hardness level of the supply water.

Starting Your Machine

•
Open the tap.
•
Plug the mains plug into the wall
socket.
•
Open the door of the dishwasher.
•
Place the dishes in accordance
with the instructions in the user
manual.
•
Check if the upper and lower
impellers rotate freely.
•
Put sufficient amount of detergent
in the detergent dispenser and
close the door of the dishwasher.
•
Press the On/Off Button.
•
Check if the salt and rinse agent
warning indicators (10, 11) are on
and add salt and/or rinse agent if
needed.
•
Determine your washing program
with the aid of the Table of
Program Data and Average
Consumption Values.
•
Select the washing program with
selection buttons (> - <) (7).
•
You can see the program time in
the Remaining Time Indicator (18).
•
If necessary, you can change your
washing program as you prefer
(13,14,15,16) by means of the
Function Button (4).
•
Start the program by pressing the
Start/Pause/Cancel Button (3).
Start ( ) Indicator will appear on
the display.
Pay attention not to open the door
of the machine when it is running. Stop
the machine by pressing Start/Pause/
25 GB