Program Follow-Up; Child (Key) Lock - Blomberg Dishwasher Instruction Manual

need to be kept pressed. "* Finished"
warning, which normally appears
at the end of the program, will be
displayed 1 minute after the process
has started. After this, you can set the
new program, function or time on the
dishwasher.
There might be residues of
detergent or rinse agent in the machine
and/or on the pieces already washed
depending on the step the cancelled
program was in at the time of such
cancellation.

Program Follow-up

You can follow-up the washing step
in which the current program is in
from the Program Steps Follow-up
indicators (17) on the display.
" " Prewash Step follow-up indicator
" " Main Wash Step follow-up
indicator
" " Rinsing Step follow-up indicator
" " Drying Step follow-up indicator
" " End of Program indicator
If the Extra Dry function is not
selected in the "Blink 20'" and "Mini
35'" programs, then the drying step
indicator will not light up.
As soon as the rinsing step is
completed, your dishwasher will switch
to pause mode for 15 minutes in order
to allow the water on the dishes and in
the machine to be removed completely,
and the water softener to be cleaned.
After this period, your dishwasher
will resume its operation and drying
indicator will turn on.
As soon as the program is completed,
"* Finished" will appear on the display
and Program Follow-up Indicator will
turn on. Remaining Time Indicator
displays "00:00".
If you did not turn of the audio signal of
your dishwasher by setting the Volume
to 0, then it will warn you with the
melody you have selected. You may
mute the audio warning by pressing
any button except the "Start/Pause/
Cancel" Button or by opening the
door. The audio warning will also stop
automatically after 2 minutes.

Child (Key) Lock

You may prevent other people to
interrupt and change the program cycle
and delay time while the dishwasher is
running.
Press "Time Delay" and "Confirmation"
buttons together for 3 seconds after
the program has started. "Enabling Key
Lock...X" will appear on the display,
where X indicates the time (in seconds)
during which the buttons need to be
kept pressed. All buttons are locked
at the end of this period, "Keylock
Activated" will appear on the display
and relevant indicator (12) will turn on.
All buttons will be nonfunctional when
child lock is selected.
To deactivate the child lock:
Press "Time Delay" and "Confirmation"
buttons together for 3 seconds.
"Unlock...X" will appear on the display,
32 GB