Warning Messages; Salt Indicator; Rinse Agent Indicator - Blomberg Dishwasher Instruction Manual

where X indicates the time (in seconds)
during which the buttons need to be
kept pressed. Key lock is deactivated
and "Keylock Deactivated" message
is displayed at the end of this period.
Key lock Indicator turns off.

Warning Messages

Your machine will give you some
important feedbacks while it is running.
Remove your filter and clean it under
running water. If there is remained
water in the tank, perform the
Cancellation and have the water in
the tank drained. Clean any leftover
deposits that have piled up in the
bottom of the tank, blocking the
water path. Clean the interior of your
machine and the tank by running a
prewash program without detergent or
a long washing program with detergent
based on the degree of dirtiness.
Please always make sure that you
scrape the large food remnants on
your dishes into a dustbin using a fork,
paper towel or a napkin before placing
them into the machine.
1. Make sure that the water is not
cut-off.
2. Make sure that the tap is open.
3. Call the service if water is not cut-
off and the tap is open.
It is possible that your machine has
taken in plenty of water due to various
reasons. Call the service.

Salt Indicator

Please check the salt indicator on
the display to see whether there is
adequate amount of softening salt
in the dishwasher or not. You need
to refill the salt reservoir with salt
whenever the no salt warning indicator
appears on the display of your
machine.

Rinse Agent Indicator

Please check the rinse agent indicator
on the display to see whether there
is adequate amount of rinse agent in
the dishwasher or not. You need to
refill the rinse agent dispenser with
rinse agent whenever the no rinse
agent warning indicator appears on the
display of your machine.
33 GB