Grundig Advance CC Service Manual page 12

AIM storage capacity Listen to AIM memory
¡
– approx. 3 minutes Press AIM TP button briefly; in the display ...
page 23, EXPERT setting .
Example
MO7 O6: 15
» «:
If the AIM memory is full the oldest traffic
– 7 traffic announcements are stored.
announcements will be deleted.
– First you will listen to the last (most recent)
AIM memory standby
traffic announcement (MO7) of 6:15 a.m.
If the car radio is on
– Successively you will listen to all recordings.
the AIM memory standby is always on when
AIM memory empty:
– a traffic radio station is set;
NO MSG
» « (No Message).
TP
» « is shown in the display and the
If you want a traffic announcement to be ...
¡
– AIM TP button is "activated".
– repeated or skipped:
If the car radio is off ¡ <
press NEXT button or
¡ > button briefly.
– AIM function (on)
N EXT
page 23: EXPERT setting .
– "fast forwarded or rewound":
– Before switching off the radio:
> button or
hold down ¡
TP N EXT
Traffic radio station is set: » « in the
< ¡
button.
NEXT
¡
display and button is "activated"
AIM TP
– aerial is ready to receive. – "Delete" AIM memory
– If TIMER is preselected:
While listening to the AIM memory, press
¡
switch-on time(s) set. U III button until signal tone sounds:
NO MSG
page 23-24: EXPERT setting or . In the display »
Notes
No AIM memory standby with car radio
switched off
if, when switched off, in the display:
NO AIM
» «.
PTY function <
Briefly press the or
desired programme type is shown in the
1. Activating the PTY function
display.
¡
Press the button briefly:
P TY/DX
< >
Press the or button until the signal
the last selected programme type is shown
sounds.
in the display.
The PTY search moves to the next station
2. Set the desired programme type ...
offering the selected programme type and
– with the PTY programme buttons
the programme type, for example, "
shown.
NEWS, SPORT, POP, CLASSICS or PERS
If no station is offering the selected pro-
Press the respective button briefly:
gramme type, you will hear the station
the PTY search starts automatically and
last tuned to and the PTY function is
moves to the next station offering the pro-
deactivated.
gramme type selected. The display shows
PTY ...
" "
3. Deactivating the PTY function
¡
Briefly press the P TY/DX
– or –
automatically after approx. 10 seconds.
"
A F
¡ ¡
TAPE / Cr
<
¡ 1 – 5
P TY/DX
Radio
If AIM memory is on and car radio is off:
– Traffic announcements that are older than
6 hours are deleted.
– If the car radio is not switched on for one
week with TIMER preselected (set switch-on
times), switching on of the TIMER will be
suppressed until the car radio is switched
on again (current consumption).
Some vehicles, when being exited, indicate
sources of current consumption that have not
been switched off, e.g. lights. This may also
be the case when the AIM memory of your car
radio is in standby mode.
Ask your car dealership whether this applies
to your vehicle and what can be done to reme-
dy this problem. In most cases it is sufficient
to connect connection A7 (+12 V) of the car
radio directly to the battery and
connection A8 (– earth) of the car radio
directly to the vehicle earth.
Line cross-section at least 1,5 mm 2 .
« (No Message).
For safety reasons it is imperative that a fuse
holder (with fuse 16 A) is used for connecting
the battery +12 V with connection A7 of the
car radio! The fuse holder should be placed
directly (short cable) at the battery.
Radio
>
button until the
POP
" is
button, or
>
ROCK M Rock music
Programme types (PTY)
M.O.R.M Light music
Prerequisite
LIGHT M Light classical music
The radio station tuned to must offer the "Pro-
gramme types" service PTY in the VHF range.
CLASSICS Serious classical music
Programme types
OTHER M Music programmes that cannot
The programme types a radio station offers be categorised (e.g., Folklore)
change according to the programme being
NO PTY No programme type identifier
broadcast.
NEWS News and current events
PTY programme buttons
AFFAIRS Politics and current affairs
The station button
INFO Special talk programme
are assigned to the following programme
SPORT Sport programme types:
1 2 3
NEWS, SPORT,
EDUCATE Learning and continuing
4
M.O.R.M) und CLASSICS (with LIGHT M).
education
The station button
DRAMA Radio plays and literature
5 PERS (personal) can be assigned to a
CULTURE Culture, church and society
programme type of your choice.
SCIENCE Science
1. Switch on the PTY function.
¡
Briefly press the
P TY/DX
VARIED Talk entertainment
2. Repeatedly press the
POP Pop music (hits)
the desired programme type is shown in
the display.
5
3. Press the button until the signal sounds.
Cassette
Cassettes
Changing the cassette side
are subjected to high temperatures during car
"
A F
Briefly press the button or when the
radio operation. Therefore use only high-
tape end is reached:
quality heat-resistant C60 and C90 cassettes
from name-brand manufacturers.
TAPE 1
" " - upper cassette side
TAPE 2
" " - bottom cassette side
Dolby noise reduction is manufactured under
license from Dolby Laboratories Licensing
Corporation. DOLBY and the Double D symbol
Cassette play with and without
are registered trademards of the Dolby
Dolby B NR
Laboratories Licensing Corporation.
Activating Dolby B NR
¡ / Cr
Selecting the TAPE programme source Briefly press the button:
Dolby B NR is activated and the display indi-
If a cassette is already loaded:
cates " ".
¡
press the TAPE button,
Deactivating Dolby B NR
or
¡
Briefly press the / Cr button:
Insert a cassette into its compartment. Dolby B NR is deactivated and "
TAPE 1
The display indicates " ". pears from the display.
Attention with automatic aerials! Selecting the tape type
Your radio switches on automatically
Selecting Cr
when loading a cassette.
¡
Press the / Cr button until the signal
sounds. The Cr mode is activated and the dis-
CR
play indicates " ".
Radio
POP (with
button.
< >
or button until
Deactivating Cr
¡
Press the / Cr button until the signal
CR
sounds. The CR mode is deactivated and " "
disappears from the display..
Fast forward and rewind
Fast forward
>
Press the button until the signal sounds.
TAPE FF
The display indicates " ".
Aborting fast forward
<
Briefly press the button or when the tape
end is reached.
Rewind
<
Press the button until the signal sounds or
when the tape end is reached.The display indi-
" disap-
TAPE Fr
cates " ".
Aborting fast rewind
>
Briefly press the button or when the tape
end is reached.