Whirlpool AMC 996 Instructions For Use Manual page 12

32602005GB.fm Page 40 Thursday, December 14, 2006 11:24 AM
JET
JET key
In COOL or HEAT mode, press this key to activate or disable the jet
function. The JET icon will appear when the jet function is activated.
The jet function will be automatically cancelled upon change of
mode or fan speed.
ROUND U
ROUND key
Press this key once to activate the ROUND U function, in which
case the ROUND U icon will appear. When the ROUND U function
is on, the remote control will send a temperature message to the
main control every 10 minutes. Press again to disable the ROUND
U function.
Note: The ROUND U function means that the air
conditioners regulates itself based on room temperature. It
does this by a sensor placed in the remote control.
SLEEP
SLEEP key
In COOL, DEHUMIDIFY and HEAT mode, pressing this key once
will activate the SLEEP function, and the SLEEP icon will appear.
Pressing again disables the SLEEP function. On changing mode or
starting/stopping the unit, the SLEEP function will be cancelled
automatically.
The set temperature will rise max 1°C if the appliance operates in
cooling mode for two hours, then it will remain constant (if room
temperature is 26°C or above, set temperature will not change).
The set temperature will rise max 3°C if the appliance operates in
heating mode for 3 hours then it will remain constant.
6th SENSE
6th SENSE key
Press this key to enter the 6th sense mode. Press again to exit the
6th sense mode and return last previous mode (COOL,
DEHUMIDIFY, FAN or HEAT mode).
Note: The 6th sense mode enables the air conditioner to
automatically select the appropriate operating mode
depending to indoor temperature to make your environment
comfortable.
LIGHT
LIGHT key
Press once to activate or disable the light function on the main unit.
40