Download Print this page
Indesit P 640 TC (IX) GB Instructions For Use And Installation
Indesit P 640 TC (IX) GB Instructions For Use And Installation

Indesit P 640 TC (IX) GB Instructions For Use And Installation

Indesit built-in hobs instructions for use and installation

Advertisement

Quick Links

Built-in hobs
P 640 TC (IX) GB
Instructions for use and installation

Advertisement

loading

Summary of Contents for Indesit P 640 TC (IX) GB

  • Page 1 Built-in hobs P 640 TC (IX) GB Instructions for use and installation...
  • Page 2 Built-in hobs Instructions for use and installation...
  • Page 3: Table Of Contents

    Congratualtions on choosing an Indesit appliance, which you will find is dependable and easy to use. We recommend that you read this manual for best performance and to extend the life of your appliance. Thank you. Contents ... pag Close-up View...pag How To Use Your Appliance ...
  • Page 4: How To Keep Your Cooktop In Shape

    • The steel parts and especially the areas with the screen- It may occur that the cooktop does not function or does not function properly. Before calling customer service for assistance, lets see what can be done.
  • Page 5: Safety Is A Good Habit To Get Into

    Improper and/or dangerous use; Obstructing the ventilation or heat dissipation slots; Allowing the power supply cord of small appliances to come into contact with the hot parts of the cooktop; Exposure to atmospheric agents (rain, sun); Using flammable liquids nearby;...
  • Page 6: Instructions For The Installer

    combustion of the gas and for ventilating the same room. Air must be taken in naturally through permanent apertures made in the outside walls of the room or through single or branching collective ventilation ducts in compliance with the standards in force. The air must be taken directly from the outside, from an area far from sources of pollution.
  • Page 7: Instructions For The Installer

    200 cm² the seal without overlapping; · insert the hob into the hole, making sure it is positioned centrally and that the edge adheres to the sealant; · position the hooks "B" correctly, as shown in figure and then tighten the screws "A" to hold them in place; Gas supply connection Check that the appliance is set for the type of gas available and then connect it to the mains gas piping or the gas...
  • Page 8: Burners And Nozzles Characteristics

    Electrical connection THE APPLIANCE MUST BE EARTHED The hob is designed to work with alternating current at the supply voltage and frequency indicated on the rating plate (situated under the hob or at the end of the instruction booklet). Make sure that the local supply voltage corresponds to the voltage indicated on the rating plate.
  • Page 12 Merloni Elettrodomestici Viale Aristide Merloni 47 60044 Fabriano Italy Tel +39 0732 6611 Fax +39 0732 662501 www.merloni.com...