Resetting To Factory Settings - Topfield CBV-7100 User Manual

3.2 Resetting to factory settings

You should set the Search Mode option to Auto at the first
service search after installing the digital receiver. The digital
receiver will search all available services with the automatic
search mode within the frequency range from the frequency
of the Start Frequency option to the frequency of the End Fre-
quency option. Symbol Rate stands for data transfer rate, and
QAM is a form of modulation used in digital broadcasting.
Broadcasting operators send their services in a symbol rate by
a modulation method. Perhaps you do not have to specify the
Symbol Rate and QAM Mode options since they are seldom
changed. However, you should set the QAM Mode option to
Auto for more certainty. You can specify the Start Frequency,
End Frequency and Symbol Rate options with the numeric
buttons if you want to change them.
To search only one frequency, set the Search Mode option to
Manual and specify your desired frequency at the Frequency
option with the numeric buttons.
To start service search, select the Start Search item, then a box
appears, displaying a list of found services. When it has com-
pleted, press the
any time or to exit without saving, press the
The digital receiver maintains the following data:
• Services list
• Favourite list
• Timer list
• Preference settings
You can reset all data of the digital receiver. To do that, se-
lect the Installation > Factory Setting menu, and then you
get asked for confirmation. If you select Yes, service entries,
favourite entries and timer events will all be deleted, and pref-
erence options will be reset to the manufacturer's factory set-
tings.
3.2 Resetting to factory settings 15
£
¢ ¡
button to save found services. To stop at
OK
£
¢ ¡
button.
EXIT