Topfield TF 6000 VI User Manual
  1. Manuals
  2. Brands
  3. Topfield Manuals
  4. Receiver
  5. TF 6000 VI
  6. User manual
Topfield TF 6000 VI User Manual

Topfield TF 6000 VI User Manual

Digital satellite receiver manufactured by topfield under viaccess license
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TOPFIELD
TF 6000 VI

User Guide

Digital Satellite Receiver
manufactured by TOPFIELD
under VIACCESS license

Advertisement

Table of Contents
loading

Related Manuals for Topfield TF 6000 VI

Summary of Contents for Topfield TF 6000 VI

  • Page 1: User Guide

    TOPFIELD TF 6000 VI User Guide Digital Satellite Receiver manufactured by TOPFIELD under VIACCESS license...

  • Page 3: Table Of Contents

    Contents iii Contents 1 Introduction Features ....... Controlling the digital receiver .
  • Page 4 iv Contents 3 Preference Settings Language settings ......14 Video and audio settings ..... . 15 3.2.1 Television standard .
  • Page 5 Contents v 5.2.5 Selecting audio tracks ....38 5.2.6 Selecting subtitle tracks ....38 5.2.7 Viewing teletext .

  • Page 7: Introduction

    Chapter 1 Introduction The TF 6000 VI digital receiver is fully compliant with the in- ternational Digital Video Broadcasting (DVB) standard, and can receive digital broadcasts. For its operation you need an antenna, which must be installed appropriately. NOTE In general we equate a channel with a frequency. Unlike ana- logue broadcasts, however, digital broadcasts are not all as- signed to their own frequencies;...

  • Page 8: Controlling The Digital Receiver

    2 Introduction • Can store up to 5000 television and radio services. • You can edit the services list. • You can create favourite lists of your favourite services. • You can view information about the current television or radio programme. •...

  • Page 9: The Front Panel

    1.2 Controlling the digital receiver 3 1.2.1 The front panel The front panel of the digital receiver has buttons to control the digital receiver, and specific lamps and a display to indicate its status. The following indicates what they mean. CHANNEL STANDBY button switches the digital receiver between standby mode and operation mode.

  • Page 10: The Remote Control

    4 Introduction 1.2.2 The remote control button switches the digital re- ceiver between standby mode and operation mode. mutes the sound. Press again to switch it back on. Numeric buttons are used to enter a service number for service change or to specify values for menu options.
  • Page 11 1.2 Controlling the digital receiver 5 displays the services list. See § 5.2.1 for more details. It is also used to select a menu item. switches between television services and radio services. displays the satellite list. buttons decrease or increase the volume. They are also used to change values for menu options.

  • Page 12: Setup

    6 Setup Chapter 2 Setup 2.1 Unpacking Before going any further, check that you have received the following items with your digital receiver. • Remote control unit • Two batteries for the remote control (AAA 1.5 V) • User manual NOTE Accessories may vary according to your local area.
  • Page 13 2.2 Safety precautions 7 • The wall outlet should be near the equipment. Do not run an extension lead to the unit. • Do not expose the digital receiver to any moisture. The digital receiver is designed for use indoors only. Use dry cloth when cleaning the digital receiver.

  • Page 14: Rear Panel Connections

    8 Setup 2.3 Rear panel connections The TF 6000 VI has some connections on the back panel. LNB IN R - AUDIO - L RF OUT RF IN RS-232 LNB OUT VIDEO S/PDIF Check what connections your television set has in comparison with the digital receiver.

  • Page 15: Connecting Up Your Digital Receiver

    2.4 Connecting up your digital receiver 9 RS-232 Serial port for firmware update and data transfer. Table 2.3: Connectors specifications VIDEO Composite video (CVBS) output AUDIO Left & right audio output CVB/RGB/YUV video output Left & right audio output CVBS video output Left &...

  • Page 16: Connecting To Your Television

    10 Setup NOTE Perhaps you are expecting that the satellite antenna could si- multaneouly catch all frequencies coming from a satellite and send them to the digital receiver. However, the satellite an- tenna only sends the frequencies that it can catch with the LNB frequency and polarization specified by the digital receiver.
  • Page 17 2.4 Connecting up your digital receiver 11 If you have such a television, use an appropriate conversion ca- ble to link the TV socket on the digital receiver to the matching socket on your television. If you connect with a standard SCART cable, you do not have to make audio connections because the SCART connector can output stereo audio.

  • Page 18: Connecting To Your Video Cassette Recorder

    12 Setup To use the RF connector If your television does not have any video and audio input, you will need to use the radio frequency output from the digital receiver. In this case, you will need to connect a ca- ble from the RF OUT socket to the antenna connector on your television.

  • Page 19: Inserting Batteries In The Remote Control

    2.5 Switching on for the first time 13 2.5.1 Inserting batteries in the remote control To insert the batteries, open the battery compartment by remov- ing the lid, and then insert the batteries observing the polarity, which is marked on the base of the battery compartment. If the digital receiver no longer reacts properly to remote con- trol commands, the batteries may be flat.

  • Page 20: Preference Settings

    14 Preference Settings Chapter 3 Preference Settings 3.1 Language settings You can select the language in which the menu would be dis- played. In addition to that, you can select which language of au- dio track and of subtitle track should be output.

  • Page 21: Video And Audio Settings

    3.2 Video and audio settings 15 Subtitle language Set the Subtitle Language option to your desired language. When you watch a programme, the subtitle track of the selected language will be displayed if available. Apart from this setting, you can select a subtitle track with the button.

  • Page 22: Colour Model

    16 Preference Settings If you have a PAL television, you have to set the TV Type option to PAL. In that case, if you switch to a service of the NTSC standard, the digital receiver will presents the pictures converting into the PAL standard. However, it is inevitable to lose a little picture quality.

  • Page 23: Television Aspect Ratio

    3.2 Video and audio settings 17 playback. But if the option is set to External A/V, the digital receiver will not pass the video automatically. To pass it, you have to press the button. 3.2.4 Television aspect ratio If you have a wide-screen television, set the TV Aspect Ratio option to 16:9.

  • Page 24: Radio Frequency Output

    18 Preference Settings 3.2.6 Radio frequency output If you have connected your television to the RF OUT socket, you should configure the radio frequency output. The digital receiver can make analogue television from digital television and output it via the RF OUT socket. Set the RF Output option to the television standard that your country supports referring to Table 3.1.

  • Page 25: Parental Control

    3.4 Parental control 19 Select the System Setting Time Setting menu. You should see a screen like the left figure. You can set the clock manually or use the time signal, Green- wich Mean Time (GMT), carried as part of the digital television broadcast.
  • Page 26 20 Preference Settings Table 3.2: Time offset table Time offset City 12:00 Eniwetok, Kwajalein 11:00 Midway Island, Samoa 10:00 Hawaii 09:00 Alaska 08:00 Pacific Time US, Canada 07:00 Mountain Time US, Canada 06:00 Central Time US, Canada, Mexico City 05:00 Eastern Time US, Canada, Bogota, Lima 04:00 Atlantic Time Canada, La Paz...

  • Page 27: Adjusting The On-Screen Display

    3.5 Adjusting the on-screen display 21 If you wish to block 15 or above rated programmes, set the Censorship option to 15 (age). Setting it to No block blocks no programme; on the other hand, setting it to Total block blocks every programme.
  • Page 28 22 Preference Settings In addition, you can raise or lower the position of the informa- tion box. Select the System Setting menu and set the Info Box Position option as you desire. Its available range is from 3 lines. The more high you set the option, the more low the information box will be positioned.

  • Page 29: Service Search

    Chapter 4 Service Search After connecting up the digital receiver, you will need to per- form a service search. 4.1 Searching broadcasting services This digital receiver can be operated with both fixed antenna and motorized antenna. You have to configure antenna settings according to your antenna system in the following order: 1.
  • Page 30 24 Service Search The other is K band which ranges approximately from 12 to 18 GHz. The LNB (Low Noise Block converter) is used to take a wide band of relatively high frequencies, amplify and convert them to similar signals that is carried at a much lower frequency, which is called Intermediate Frequency (IF).
  • Page 31 4.1 Searching broadcasting services 25 ever, if you have selected the Other entry at the Satellite Name option to specify a satellite that is not in the satellite list, you might have to fill in the correct LNB frequency. The absolute difference between a broadcasting frequency and its LNB fre- quency must be within 950 to 2150 MHz.

  • Page 32: Configuring Diseqc 1.2 Settings

    26 Service Search 4.1.2 Configuring DiSEqC 1.2 settings Your motorized antenna will turn toward your desired satellites horizontally by DiSEqC 1.2. When you switch to an service, if the service is provided by a satellite other than current one, it will take longer time than usual because the antenna has to turn to its position.

  • Page 33: Configuring Usals Settings

    4.1 Searching broadcasting services 27 you had better check the receiving quality of every trans- ponder and choose the best one at the Transponder (or Frequency) option. It will be helpful to your fine tuning. 5. Finally set the Motor Control option to Store to save the tuned position when the receiving quality is best.

  • Page 34: Searching Services

    28 Service Search 2. Enter your location to the My Longitude option and the My Latitude option with the and numeric buttons. 3. Enter the position of your selected satellite to the Satellite Angle option if it is not correct. 4.
  • Page 35 4.1 Searching broadcasting services 29 • Searching every service of a SMATV (Satellite Master Antenna Television) system. Searching every service of a satellite To search every service of a satellite, perform the following steps: 1. Choose your desired satellite at the Satellite Name op- tion.
  • Page 36 30 Service Search NOTE You may get transponder information from a satellite magazine or website such as Searching one service of a transponder To search one service of a transponder, perform the following steps: 1. Choose your desired satellite at the Satellite Name op- tion.

  • Page 37: Editing The Transponder List

    4.2 Editing the transponder list 31 5. Set the Polarization option to the polarization of your desired transponder. You can search pay services as well as free services as follows: • To search only free services, set the FTA/Scrambled option to FTA only.

  • Page 38: Resetting To Factory Settings

    32 Service Search To delete a satellite entry, select your desired entry at the Satel- lite Name option and select the Delete Satellite option; then you get asked for confirmation. If you select Yes, it will be deleted. To add a transponder entry, select your desired entry at the Satellite Name option and select the Add new TP option.
  • Page 39 4.4 Resetting to installer settings 33 • Preference settings Also you can restore them at any time. To store your data, select the Installation System Recovery menu and select the Store option; then you get asked for the presonal identification number. The number may be different from yours because this function is usually permitted only to installers.

  • Page 40: Daily Usage

    34 Daily Usage Chapter 5 Daily Usage 5.1 Volume control Use the buttons to alter the volume to a comfortable level. You may need to adjust the volume on your television set too. To temporarily switch off the sound, press the button.
  • Page 41 5.2 Watching television 35 On the services list, you can see the service information: • Service number and name • Transmitting satellite • Transponder information A dollar sign ($) may be marked on some entries, indicating pay service. To watch pay services, you need the subscription card.

  • Page 42: Watching On Multi-Picture Screens

    36 Daily Usage 5.2.2 Watching on multi-picture screens Pressing the button displays the multi-picture options; you can choose one among four layouts: 4, 9, 13, or 16 screens. If you choose the 13 screens, the current service will be presented with still images of six services prior and posterior to it.

  • Page 43: Viewing Programme Information

    5.2 Watching television 37 favourite services list. Once you select a desired service with button, it will be presented. Otherwise, to select other group, press the button. After you have selected a favourite service, if you then switch to another service using the button, it will be also another favourite service of the selected group.

  • Page 44: Selecting Audio Tracks

    38 Daily Usage • Subtitle symbol ( ) if subtitle tracks are provided on the current programme. • Teletext symbol ( ) if teletext pages are provided on the current service. • Lock symbol ( ) if the current service is locked. •...

  • Page 45: Viewing Electronic Programme Guide

    5.3 Viewing electronic programme guide 39 current service provides teletext, the teletext symbol ( ) will be displayed on the information box. Press the button to view teletext pages. Select a desired page to view by entering its page number with the numeric buttons.

  • Page 46: Watching Multifeed Programme

    40 Daily Usage You can make a timer event on the electronic programme guide as follows: 1. Select a service you want. 2. Press the button to display its programme guide. 3. Select a programme you want with the button, then P is marked up on the entry.
  • Page 47 5.5 Making timer events 41 To input a timer recording, select the System Setting Timer Set- ting menu; then the timer list will be displayed. To add a new timer event, press button, and a box like the left figure appears. Take the following steps: 1.
  • Page 48 42 Daily Usage 5. Set the Date option to a desired date, on which the digital receiver will turn on. The date format is day/month/year- day of the week. Set the Wakeup Time option to a desired time, at which the digital receiver will turn on.

  • Page 49: Listing Services

    Chapter 6 Listing Services 6.1 Editing the services list You would have got the services list after service search. You can rename, move, lock or delete service entries on the services list. Select the Organizing Services menu. You should see a screen like the left figure.
  • Page 50 44 Listing Services To edit the radio services list, press the button; then radio service entries will be listed on the right column. To switch back to the television services list, press it again. To change the name of a service, select the Rename and select a desired service;...

  • Page 51: Editing The Favourite List

    6.2 Editing the favourite list 45 Sort Fav–NoFav from favourite services to unfavourite ser- vices. Sort Sat Name by satellite 6.2 Editing the favourite list You can make your own favourite services list. In fact, you can define multiple favourite services lists, each being a ‘group’ of chosen services.
  • Page 52 46 Listing Services You can add a favourite service to a group by taking the follow- ing steps: 1. Put the highlight bar on a desired group entry in the group list and press the button to select it. The high- light bar then moves to the services list.

  • Page 53: How To Use On-Screen Keyboard

    6.3 How to use on-screen keyboard 47 6.3 How to use on-screen keyboard You can move the highlight key horizontally with the buttons and vertically with the buttons. Pressing the button on a key enters its let- ter in the input line. To type a space, select the Space key.

  • Page 54: Index

    48 INDEX Index 16:9, DVB, 16:9 Display Format, 22 kHz, Electronic Programme Guide, 4:3, Every Day, Every Weekday, A/V Output Setting, Every Weekend, Access Control, Add new TP, Factory Setting, Add Satellite, Frequency, 27–30, Advanced, FTA + CAS, AUDIO L, FTA only, AUDIO L/R, FTA/Scrambled,...
  • Page 55 LNB Setting, RF OUT, 12, Local Time, RF Output, Lock, RS-232, Manual, S/PDIF, Menu Language, S/PIDF, Mini A, SAT Name Edit, Mode, 19, SAT/TP Edit, mono, Satellite, Motor Control, 26, Satellite Angle, Motorized DiSEqC 1.2, satellite list, 24, Motorized DiSEqC 1.3, Satellite Name, 24–27, 29–32 Move, 28,...
  • Page 56 50 INDEX transponder, TV, 10, 11, TV Aspect Ratio, TV Type, Type, USALS, USALS Setting, User, VCR, VCR, VCR Scart Type, VIDEO, VIDEO, 10, Video Output, Wakeup Time, Weekly, wide-screen television,...
  • Page 58 Correct disposal of this product This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Table of Contents