Table of Contents
Advertisement
4.6 Standby mode 23
In addition, you can raise or lower the position of the informa-
tion box. Select the System Setting menu and set the Info Box
Position option as you desire. Its available range is
10 to +3
lines. The higher you set the option, the lower the information
box will be positioned.
4.6 Standby mode
You can save power consumption in standby mode by setting
the LPC Settings option in the System Setting menu. Nor-
mally the front display shows the current time in standby
mode. However, if you set the Enable front display option
to No, the front display will be turned off to save power. In
addition, when there is no other digital receiver connected to
the CABLE OUT socket, you should set the Enable the loop-
through option to No. By disabling these options, you can save
power consumption more than 1 watt in standby mode.
Advertisement
Table of Contents
