Table of Contents
Advertisement
To use the Composite video output
To make the audio connection
2.5 Switching on for the first time
You need to obtain a Composite video cable
(RCA cable) to use the Composite video out-
put. Plug one end of the cable into the VIDEO
(yellow) socket on the digital receiver, and
plug the other end into the matching socket on
your television.
NOTE
You cannot view high definition video by means of the Com-
posite video output.
You need to obtain an audio cable (RCA ca-
ble) to link the audio connectors. Plug one
ends of the cable into the AUDIO L (white)
and AUDIO R (red) sockets on the digital re-
ceiver, and plug the other ends into the match-
ing sockets on your television or audio-video
receiver.
Now that you have your digital receiver connected, you should
plug it into a wall socket. Ensure that your television set is
2.5 Switching on for the first time 11
To enjoy Dolby Digital audio, your television
or audio-video receiver must be able to de-
code Dolby Digital audio, and you need to
obtain an S/PDIF cable. Plug one end of the
cable into the S/PDIF socket on the digital re-
ceiver, and plug the other end into the match-
ing socket on your audio-video receiver.
Advertisement
Table of Contents
