Samsung UN46C9000 User Manual page 70

USing
a D·Sub Cable
Digital Audio System
USing
an AudiO Cable
USing
an Optical Cable
USing
an HOMI to DVI Cable
Amplifier / DVD home theater
I
AUDIOI:
I
Audio Cable (Not Supplied)
Connect your TV to your Home Theater
or other audio device to enjoy enhanced
Sound quality.
Connect your TV to a PC to use it as a Monitor,
~~~.~.~~~!~~._~.~~
_-_.._ .._-_. _ _ _. _ _ __ _ _. _ ---
Device
DVD, Blu-ray player, cable box,
STB satellite receiver, VCR
Device
USing an HDMI Cable
USing
a Component Cable
USing an HDMI to DVI Cable
Very Good Connection
I
HDMIOUT
I
DVD, Blu-ray player, HD cable box,
HD STB (Set-Top-Box),
Device
satellite receiver
Good Connection
I ~~~:OU~ I
I
AUDIOO~T
I
Audio Cable (Not Supplied)
ComponenlCable(NotSupplied)
HDMI toDVI Cable (Not Supplied)
Component Adapler (Supplied)
Best Connection
DVD, Blu-ray player, cable box,
STB satellite receiver, VCR
USing
an AudloNldeo Cable
Lowest Quality Connection
Audio Cable (NolSupplied)
Video Cable (Not Supplied)
AVAdapter(Supplied)
AVAdapter(Supplied)
Use one of the connections below to connect
your TV to an externallVV device,
We recommend using HDMI for the highest
picture quality.
~~~_~.~~~!~fJ .. ~ .~ .. 'YY..~~_'!~~.~.Jgyg!~).~.~~~¥.J?~~y.~~!.~~p.I.~!.~~!~)~~!~
..
~~~!.~~~:~
......................•............._ _ _ .
Step 3:
Connect External Devices
3
Slide and close the
battery cover in
the direction of the
arrow.
Insert the battery
with the Samsung
logo facing up.
1-800-SAMSUNG (1-800-726-7864)
Samsung Electronics America, Inc.
105 Challenger Road Ridgefield Park, NJ 07660-0511
Samsung Electronics Canada Inc.
55 Standish Court Mississauga, Ontario L5R 4B2
Call Center hours of operation: Mon-Sun, 9:00 AM -12
AM EST.
To register this product, visit: www.samsung.com/
register.
1
Slide and open the
2
battery cover in
the direction of the
arrow.
Touch Remote Control
Quick Setup Guide
Congratulations on the purchase of your new Samsung 1V.
Read this setup guide to get your1V up and running quickly.
Mini Remote Control
Step I:
Install the Batteries into the Remote
VHF/UHF Antenna
Wide Fit
4:3
Standard screen
16:9
Wide screen
Dynamic Brightens picture. For a vibrant, enhanced image in brightly lit or
sunny room.
Natural For a comfortable, easy-on-the-eyes picture in a normally lit room.
Movie For a studio quality cinema picture in a dimly lit or dark room.
~ Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
Mode Description
Standard For a bright, detailed picture in a normally lit room,
~~~!-l.9-~~9_~!l.~.~~~~~~~
__
~_~~~_
_ _._._ _.__._._ _
Your TV has four preset Picture Modes with factory adjusted settings, each
designed to give you an excellent picture under specific conditions,
The Picture Modes are listed and described in the table below:
To change the Picture Mode, follow these steps:
1. Turn on your TV, press the TOOLS button on your remote, The Tools menu
appears.
2. Using the'" or T on your remote, select Picture Mode.
3. On the Picture Mode menu, use the .... or
~
on your remote to select the
Picture Mode you want.
4. Press the EXIT button to exit the menu.
~~~~.9-~~9.~.~.~.~~!~~~.~}.~.~_.
__. _. _ _ _.__ _. _ .
11
The Enjoy your TV. screen appears, Then press the ENTER G button.
Your TV has several screen size options, each designed to work best with specific
types of video input. If you have a cable box or satellite receiver, it may have its own
set of screen sizes as well.
To change the screen size, press the P.SIZE button on your remote, The first time
you press it, your TV displays the current setting. Thereafter, each time you press
the P.SIZE button, you change the size of the picture on the screen,
The following sizes are available:
~
If your TV is attached to a cable or satellite box, skip Steps 3 through 5. After
Plug & Play is complete, set your TV to Channel 3 or 4, according to the
directions for your cable or satellite box,
6
The TV memorizes the available channels, This process can take up to 45
minutes,
7
After the TV has memorized the channels, choose the Clock Mode. Select
Auto if you have a digital channel in your area, Select Manual if you don't, or
if you have a cable or satellite box. When done, press the ENTER G button,
~
If you select Manual, the clock setting screen appears,
8
Select the daylight savings time setting: Off or On, and then press the
ENTERG button.
~ This function is only available when the Clock Mode is set to Auto,
9
Select the time zone in which you live, and then press the ENTER G button.
10
After the time zone screen, The connection method for best HD screen
quality is displayed. Press Right arrow button on your remote to view each
screen in succession. Press the Blue button to skip this section,
AutomatlCallyPnPMenuwlllbedlsplayed~
afterpalringtheremotecontroltotheTV
PlI'..
~
3
Using your remote control, select the language for the On Screen Display
(OSD), and then press ENTER G button,
4
Select Home Use, and then press the ENTER G button. If you select Store
Demo, the TV will reset your picture and audio settings every 30 minutes.
5
Select Antenna Source. If Antenna Source is Air, Cable or Auto, you must
select your cable system type, After selecting source, select Search; then
press the ENTER G button on your remote.
~
Most cable systems are Standard (STD) systems, If you are not sure about
what kind of cable system you have, contact your cable company.
Step
4:
Run Plug & Play
When you turn on your TV for the first time, it automatically launches the Plug &
Play function. With Plug & Play, you can select the On Screen Display language, set
the clock mode, and launch the TV's channel memorizing process.
It also displays connection instructions similar to those in this guide,
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow
buttons on your remote, To make a selection, press the ENTER G button.
To skip a screen, press them button, To turn on your TV, press the POWER button
on the remote or on the TV. To run Plug & Play, follow these steps:
1
Turn on the TV and Touch Remote, and
then tap OK on your remote.
~
It may take about one minute to establish
a wireless connection between the TV and
touch remote using the Samsung Wireless
LAN Adapter.
2
Connect the Samsung Wireless LAN
Adapter to the TV. If you are failed, reconnect the Samsung Wireless LAN
Adapter and then try again, For connecting the Samsung Wireless LAN
Adapter, please see your Owner's Manual.
Usea750hm(round)cable.
1111111111111111111111111111111111111111111
2
Insert a 3V Lithium battery.
3
Place the battery cover into
the remote control aligning it
with the grooves and then turn the battery cover clockwise to lock the cover.
~
If the remote control doesn't work, check the following:
• Is the TV power on?
• Are the plus and minus ends of the batteries reversed?
• Are the batteries drained?
• Is there a power outage or is the power cord unplugged?
• Is there a special fluorescent light or neon sign nearby?
Step 2:
Connect Power and Antenna or Cable
1
Turn the battery cover
counterclockwise to unlock it
and then separate the battery
cover.
BN68-02834A-OO