Samsung UN46C9000 User Manual page 100

.....
;
C
~
. •
()
18
Change the code set by tapping or and then
select <Send IR>.
If the external device turns on or off, select <Apply> to
register the external device.
If you can't find codeset on the list. tap <Learn> to
start the remote's external device registration process.
• Tap <Help> for learning guide or tap <OK> to start
learning.
You must now assign the control buttons on the
device's remote to corresponding buttons on the LCD
remote. To begin, tap a button on the LCD remote's
screen to which you want to assign a button from the
device's remote.
• The selected button blinks.
Press the corresponding button on the device's remote.
• When the button LCD remote's stops blinking, the
assignment is complete. Assign the other buttons in the
same way.
• To register the Channel, Volume and Mute buttons on
an external device, tap <VOUCH> at the top of the
touch remote.
Select <OK> to complete the registration .