Samsung UN46C9000 User Manual page 118

Securing the TV to the Wall
Caution:
Pulling, pushing, or climbing on the 1V may cause the 1V to fall. In particular, ensure your children
do not hang over or destabilize the 1V; doing so may cause the 1V to tip over, causing serious injuries or
death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the
anti-fall device for safety purposes, as follows.
Accessories
1V-Holder Screw (M4Xl12)
To prevent the TV from falling
1.
Remove the screw attached to the back of your 1V, then connect the 1V-Holder to the 1V with the screw.
~
Make sure to only use the supplied screw.
~
When you install the wall-mount, refer to the "Securing the TV to the wall" in the TV manual for installation type.
1----------'
I
CQ::~
0
I
~CJI
2. Firmly fasten the screw to the wall or cabinet where the 1V is to be installed. Tie the 1V-Holder attached to the 1V and the
screw fastened on the wall or cabinet so that the 1V is fixed.
~
Only the screw needed to attach the holder to the TV is supplied. The screw to attach the Holder to the wall or
cabinet must be purchased separately. We recommend purchasing a size M4xL20 wood screw.
~
Install the TV close to the wall so that it does not fall.
~
When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes.
~
Check the cord occasionally to make sure it is secure.
~
Before moving the TV, separate the connected cord first.
3. Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. If you have any
doubt about the security of your connections, contact a professional installer.