Advertisement
12-11 Burn Mode
Sets style of burning for Audio CDs. DAO (Disc At Once) burns the entire media without
stopping. TAO (Track At Once) burns each audio track individually. Default setting is DAO.
12-12. Display Time
When set to ON, unit will display a timer during copy operations. Default setting is ON.
12-13. Button Sound
When set to ON, unit will emit a beep sound whenever keys are pressed. Default setting is
ON.
12-14. Device Info
Displays details about each drive unit.
12-15. System Info
Displays details about the duplicator.
12-16. Quick Erase
Erases file system on all rewritable media detected.
12-17. Full Erase
Erases all data on all rewritable media detected.
12-18. Auto Close Tray
Allows trays to be closed automatically after a set time when Copy or Test functions are
selected. Default setting is OFF.
12-19. Quick Compare
Controls behavior of the Compare function. When set to a numerical size, only that much data
will be compared before the unit considers a compare OK. Default setting is OFF for full
comparison.
12-20. Link Mode Select
Allows multiple duplicators to be connected together to copy more targets from a single
source. This feature is not supported for this duplicator.
12-21. Re-scan
Rescans all ports for drives with media inserted.
12-22. Tray-In/Out
Controls behavior of ejecting drives. Default setting is All Once.
12-23. Boot Time Delay
Sets delay in seconds during initialization to allow drives to settle. Default setting is 5
seconds.
12-24. Start Tray Eject
When set to ON, all drives will be ejected during initialization after power up. Default setting is
ON.
12-25. Disc Redetect
When set to ON, the duplicator will retry once if an error occurs during disc detection. This
feature is used for low quality media. Default setting is OFF.
12-26. Show Burn Speed
When set to ON, burn speed will be displayed during copy process. Default setting is ON.
www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
Advertisement
