Summary of Contents for Addonics Technologies DDU3SAS
Page 1
T E C H N O L O G I E S E N T E S C User Guide 1:3 Blu-Ray / DVD Duplicator (DDU3SAS) CONTACT US www.addonics.com v3.1.11 www.addonics.com Technical Support If you need any assistance to get your unit functioning properly, please have your Phone: 408-573-8580 product information ready and contact Addonics Technical Support at:...
Page 2
Diagram Source SATA Port 3 Destination (top port) SATA Ports 15-pin SATA Power Connector Mounting Holes E N T (2 on each side) E S C Scroll Up Duplicator Panel Executes Function Cancels Function Scroll Down Technical Support: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.com/support/query/...
Quick Guide 12.19 Quick Compare Quick Compare is related to function#5 Compare. Once compare error byte reach to the setting figures, compare process will stop. Installing the 1:3 optical duplicator 12.20 Link Mode Select (Select Models) Now press ESC and ▼ to enter the following screen. Press ENT to enter the “Link Mode Select” Step 1 screen.
To select any function from #1 to # 13 as the first item appears on the screen whenever system is Panel Functions turned on. 12.6 Auto Verify To set if auto verify target disc's readability after copy function. The default is Off. Press ▼ to select On. Scroll Up Duplicator Panel 12.7 Auto Compare...
10.3 Close Session 1. Copy Single session format is used for Audio CD, and commercial audio player is not able to play open Function#1 Copy, instant copy source (disc/image) to the target drives (optical writes). Use Function#8 session audio CD, therefor session must be closed to max. playback compatibility. However, no to select source drive before copying.
Page 6
9. Image 9.9 Format HDD Hard disk must be formatted by the system for the very first time. Hard disk will be partitioned into Function#9 Image is valid only when a hard disk is installed. Disc is loaded to hard disk as an the chosen partition format.