Advertisement
Duplicator Functions
The duplicator has six menu sections: The Main menu, Image, Edit Track, Lightscribe, Setup
Options and Advanced Setup. Advanced Setup Options is accessed through the Main menu.
Advanced Setup is accessed by holding the ESC button from any other menu until the unit
beeps.
1. Copy
Copies from the source to the target drives. Rewritable media may be used for targets;
however, all existing data will be erased before proceeding with the copy operation. Insert all
discs and wait for the drives to settle before pressing ENT. When complete, elapsed time will
be displayed as well as the number of OK copies made. Discs copied OK will be ejected
automatically.
2. Test
Simulates copy process. Function is identical to Copy without actually writing source data to
target discs. Rewritable media may be used; however, all data will be erased before Test
process proceeds with simulation. Testing is not supported for DVD+R media.
3. Test & Copy
Performs Test function followed by Copy function. Testing is not supported for DVD+R media.
4. Verify
Confirms all target discs are readable.
5. Compare
Confirms all data on target discs as identical to source disc. Results are: OK for identical data,
FAIL indicates target Table Of Contents does not match or too many mismatches occurred,
and DIFF will show number of bytes that are different.
6. Prescan
Confirms source disc is entirely readable without error.
7. Disc Info
Detect and report disc type and capacity.
8. Select Source
Allows selection of source drive. Default is CH01, which is the top unit on this duplicator.
Selecting HDD is not supported on this duplicator. Leaving this set to CH01 is strongly
recommended.
9. Image Menu
The Image feature is not supported with this duplicator.
10. Edit Track Menu
The Edit Track feature is used for collecting individual tracks from one or more audio CDs and
merging them to create target discs with the custom collection.
10-01. CD to CD Edit
Entering this function will display each track on the LCD, use arrow keys to change
tracks, press ENT to select or deselect a track. Selected tracks will display a "+".
When all desired tracks are selected, use arrow keys until "End" appears then press
ENT. After confirming the selection, the duplicator will burn the selected tracks to the
target media. When complete, press ENT and the duplicator will ask if you want to
continue. Selecting "Yes" will eject the source disc and prompt for the next source,
then return to track selection. Selecting "No" will respond with "Close all discs'
session?" to confirm finalizing target media. When target media sessions are closed,
no further tracks may be added. If target media is not closed, more tracks may be
added later; however, the discs may not be playable on all CD players.
www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
Advertisement
