Disassembly Instructions - Kenmore 796.4044*9 Series Service Manual

10. DISASSEMBLY INSTRUCTIONS

Be sure to unplug the machine before disassembling and repairing the parts.
CONTROL PANEL ASSEMBLY
Unscrew 2 screws on the back of the top plate.
1
Pull the top plate backward and upward as shown.
2
Disconnect the Display PWB assembly connector
3
from trans cable.
Pull out the drawer and unscrew 2 screws.
4
5 Remove one screw.
Lift the side the control panel assembly and
6
pull it out
Unscrew the 9 screws(M4), 1 screw(M3) from
7
the control panel assembly.
Disassemble the Display PWB Assembly.
8
48