Dell Inspiron 2500 Factory Service Manual page 72

Removing and Replacing Parts : Dell Inspiron 2500 Systems
NOTICE: When reinstalling a screw, you must use a screw of the correct diameter and length. Make sure
that the screw is properly aligned with its corresponding hole, and avoid over tightening.
Screw Placemat
Hard Drive Door Security:
M3.0 x 5 mm (1 each)
Display Bezel:
Rubber screw covers (4 each)
Plastic screw covers (2 each)
M2.5 x 4 mm (6 each)
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...hecked%20ok/Inspiron/2500/2500%20SM/remove.htm (3 of 46)6/21/2004 12:45:37 AM
Keyboard to Bottom Case
Assembly:
M2.5 x 20 mm (4 each; one in
memory door and one in Mini PCI
card door)
Display Panel to Display
Mounting Bracket: 15-inches
M2.0 x 3 mm (6 each)
Flex-Cable Mounting Bracket to
Top Cover:
M2.5 x 4 mm (1 each)
Display to Base:
M2.5 x 6 mm (3
each; 2 at back of
system; 1 at flex-
cable strain relief)
Display Panel to
Display Mounting
Bracket: 14.1-
inches
M2.0 x 3 mm (4
each)
Flex-Cable
Mounting Bracket
to Top Cover:
M2.5 x 4 mm (1
each)