Horizon Fitness Endurance 4 Owner's Manual page 9

ENDURANCE 5 ASSEMBLY STEP 2
HARDWARE foR STEP 2:
FLAT WASHER (D) SPRING WASHER (E)
16 mm 15 mm
Qty: 4 Qty: 4
FLAT WASHER (H)
20 mm
Qty: 4
ENDURANCE 5 SHoWN
BOLTS (F)
SPRING WASHERS (E)
FLAT WASHERS (D)
INCLINE BRACKET
NUTS (J)
SPRING WASHERS (I)
FLAT WASHERS (H)
BOLT (F) BOLT (G)
20 mm 35 mm
Qty: 4 Qty: 4
SPRING WASHER (I)
NUT (J)
18 mm
Qty: 4
Qty: 4
MAIN FRAME
BOLTS (G)
GUIDE RAIL SET
ENdURANCE 5
* This step is for
Open hardware for step 2.
A
Attach the guide rail set to the
B
main frame using 4 bolts (f), 4
spring washers (e) and 4 flat
washers (d).
Attach the guide rail set to the
C
incline bracKet using 4 bolts (g),
4 flat washers (h) and 4 spring
washers (i) and 4 nuts (J).
NOTE: You may need to pull the incline
bracket out of the main frame in order to
connect it to the guide rail set.
models only.
ENDURANCE 5
ONLY
9