Horizon Fitness Endurance 4 Owner's Manual page 13

ASSEMBLY STEP 6
LOWER LINK ARM
TEFLON WASHERS (W)
ENDURANCE 5 SHoWN
Open hardware bag 6.
A
Align end of lower linK arm with bracket on
NUT (AA) B
bottom of lower handlebar.
LOWER HANDLEBAR
Place teflon washers (w) on both sides
C
FLAT WASHER (X)
of the lower linK arm. While holding
SPRING WASHER (Y)
teflon washers (w) slide lower linK
BOLT (Z)
arm into bottom end of lower handlebar.
Secure the joint with 1 flat washer (X), 1
d
spring washer (y),1 bolt (z) and secure
with 1 nut (aa).
Repeat steps B–d on the opposite side of the
E
elliptical.
HARDWARE BAG 6 CONTENTS :
TEFLON
FLAT WASHER (X)
WASHER (W)
17 mm
28.4 mm
Qty: 2
Qty: 4
BOLT (Z)
70 mm
Qty: 2
ALL
SPRING WASHER (Y)
MODELS
15 mm
Qty: 2
NUT (AA)
Qty: 2
13