Horizon Fitness Endurance 4 Owner's Manual page 15

ASSEMBLY STEP 8
ENDURANCE 5 SHoWN
CONSOLE
CONSOLE MAST
HANDLEBAR CAP
CONSOLE CABLES
UPPER HANDLEBAR
PRE-INSTALLED BOLTS
PRE-INSTALLED
SET SCREWS
LOWER HANDLEBAR
NOTE: Be careful not to pinch
any wires while attaching the
console or handlebars.
NOTE: There is no hardware bag for this step.
A Attach the console cables to the console.
B Carefully tuck the Console cables into the
console mast before attaching the console.
Attach console to console mast using 4
pre-installed bolts.
C The handlebar to the upper handlebar.
Slide upper handlebar onto lower
d
handlebar making sure handlebars are joined
together completely. Secure upper handlebar
to lower handlebar using pre-attached
set screws.
E Repeat step E on other side.
Make sure upper handlebars are as far down as possible.
Handlebars can be damaged If not secured correctly.
ALL
MODELS
15