Table of Contents
Advertisement
2
Hardware Installation
Universal Serial Bus Connectors
USB 3
USB 2
USB 1
USB 0
The system board supports 6 USB 2.0/1.1 ports. USB allows data
exchange between your computer and a wide range of
simultaneously accessible external Plug and Play peripherals.
The 4 onboard USB 2.0/1.1 ports (Black) are at locations CN6
(USB 0-1) and CN7 (USB 2-3).
The J24 (USB 4-5) connector allows connecting 2 additional USB
2.0/1.1 ports. The USB ports may be mounted on a card-edge
bracket. Install the card-edge bracket to an available slot at the rear
of the system chassis then insert the connector that is attached to
the USB port cables to J24.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals submenu
("Onboard Device" section) of the BIOS. Refer to chapter 3 for
more information.
34
Mouse
1 0
2
1
9
KB
USB 4-5
Advertisement
Table of Contents
