Invacare TDX SP User Manual page 31

CAUTION! Damage to mobility aid caused by one-sided loading on lifter pillar!
• One-sided loading occurs if the seat is raised and/or tilted. Always return your seat backrest to
the upright position and the seat tilting to the horizontal position before ascending slopes! !
Never subject the lifter pillar to continuous single-sided loading! The raising and tilting function
of the seat only provides additional rest positions.
Important information regarding speed reduction with raised lifter!
If the lifter has been raised above a certain point, the drive electronics considerably reduces the
speed of the mobility aid. If speed reduction has been activated, drive mode can only be used to
carry out minor movements of the mobility aid and not for regular driving! To drive normally,
please lower the lifter until the speed reduction has been deactivated again!
31