OVERVIEW Volfoni EDGE 1.1+ DLP -Link™ 3D Glasses can only be used ® with DLP -Link™ 3D ready TV Sets and DLP -Link™ Projectors. ® ® Characteristics Authorized DLP -Link™ communication ® Rubber nosepiece Stylish and rugged Unbeatable receiving angle...
Page 3
What is required for a DLP -Link™ 3D system ® 3D Contents (3D movies, Games etc ) 3D Playback Device (3D Ready PC, Blu-ray Player, 3D TVs...) 3D Playback Software (required when viewing 3D movies on 3D ready PC) -Link™ 3D Display (DLP -Link™...
Page 4
HOW TO USE THE 3D GLASSES Set your playback device to 3D, press the power button to turn on the glasses. Now you are ready to enjoy vivid 3D content. Turning ON the Glasses: Press the Power Button once. Red LED is on for 1.5 seconds and LC lenses will then turn black.
To open the battery encasement on the right arm of the glasses: -Use an instrument such as the Volfoni's battery tool, a paper clip or a prong. -Put the glasses on a desk/table as it will be more convenient and easy.
Page 6
These parameters are for information purpose only. They may be adapted if necessary. Type of liquid crystal Twisted Nematic Fall time 0.2 ms Rise time 1.8 ms 1:200 (no ghosting) Contrast Transmission in the clear state Residual light 16,5% Chromaticity Color correction not mandatory Sync operation -Link...
Page 7
Caution 1. The glasses are designed to view 3D contents only. Do not use the glasses as general eyewear, UV protector, reading glasses. 2. The glasses are powered by CR2032 type lithium-manganese dioxide battery. The battery should be replaced with a same or equivalent type, and should be installed in correct polarity.
Page 8
Warning – Epilepsy and Seizures Some individuals may experience seizures or lose consciousness momentarily when exposed to certain flashing lights and patterns that may appear in television, PC pictures or video games. Even people who have no history of seizures or epilepsy may have an undiagnosed condition.