Selecting The Base Unit Access - Panasonic KX-TCD952BLB Operating Instructions Manual

KX-TCD952BL(E)34~42
Registration

Selecting the Base Unit Access

Automatic base unit access
The handset automatically selects a registered base unit.
· When the handset moves to another base unit radio area, it loses contact with the previous base unit
and automatically accesses the new base unit.
· If the handset is in the overlap area between several base unit radio areas, the handset will access a
base unit in the order of the base unit numbers.
Specified base unit access
You can only select one registered base unit (1 to 4) you want to operate.
· You can choose the base unit/telephone line where you can make/receive calls.
The factory preset is "Automatic base unit access". To select the desired base unit, program as
follows.
1
Press
2
Press or
3
Press .
OK
· The current setting is flashing.
0: Automatic base unit access
1 to 4 (The registered base unit number):
Specified base unit access
Ex. Automatic base unit access is selected.
F i000 i234
4
Press or
unit number (1 to 4).
· You can also press the desired base unit
1
number
· The selected base unit number flashes.
Ex. Base unit 1 is selected.
F i000 i234
36
18/4/00 15:06 Page 36
.
until " F i " is displayed.
to select the desired base
to 4 .
5
Press .
· A confirmation tone sounds and the
display will return to the stand-by mode.