Selecting The Base Unit Access - Panasonic KX-TCD951EB Operating Instructions Manual

Registration

Selecting the Base Unit Access

Automatic base unit access
The handset automatically selects a registered base unit.
When the handset moves to another base unit radio area, it loses contact with the previous base unit
and automatically accesses the new base unit.
If the handset is in the overlap area between several base unit radio areas, the handset will access a
base unit in the order of the base unit numbers.
Specified base unit access
You can only select one registered base unit (1 to 4) you want to operate.
You can choose the base unit/telephone line where you can make/receive calls.
The factory preset is "Automatic base unit access". To select the desired base unit, program as follows.
1
Press PROG
Press G or F until " F i " is displayed.
2
3
Press
OK
The current setting is flashing.
0: Automatic base unit access
1 to 4 (The registered base unit number):
Specified base unit access
Ex. Automatic base unit access is selected.
F i000 i234
Press G or F to select the desired
4
base unit number (1 to 4).
You can press the desired base unit
1
number
The selected base unit number flashes.
Ex. Base unit 1 is selected.
F i000 i234
32
.
.
to 4 .
5
Press .
PROG
A confirmation tone sounds and the
display will return to the stand-by mode.