Selecting The Base Unit Access - Panasonic KX-TCD955EC Operating Instructions Manual

Registration

Selecting the Base Unit Access

Automatic base unit access (Auto)
The handset automatically selects a registered base unit.
When the handset moves to another base unit radio area, it loses contact with the previous base unit
and automatically accesses the new base unit.
If the handset is in the overlap area between several base unit radio areas, the handset will access a
base unit in the order of the base unit numbers.
Specified base unit access
You can only select one registered base unit (1 to 4) you want to operate.
You can choose the base unit/telephone line where you can make/receive calls.
The factory preset is Auto (automatic base unit access). To select the desired base unit, program as
follows.
1
Press .
F
Press G or F until the arrow points to
2
"Program".
3
OKH
Press
H S e l e c t B a s e
S e t t i n g H a n d s e t
D i s p l a y O p t i o n
4
While "Select Base" is at the arrow,
OKH
press
The current setting, "Auto" or a
registered base unit number is at the
arrow.
S e l e c t B a s e
H A u t o
B a s e 1
46
.
.
Press G or F to select the desired
5
base unit.
6
OKH
Press .
A confirmation tone sounds and the
handset will return to the stand-by mode.
The selected base unit number will be
displayed.
You can exit the programming mode any time
by pressing C .