How To Use The Pause Feature (For Analog Pbx Line/Long Distance Service Users) - Panasonic KX-TCD952BLB Operating Instructions Manual

KX-TCD952BL(E)14~23
How to Use the Pause Feature
(For Analog PBX Line/Long Distance Service Users)
We recommend you press
distance service.
Ex: Line access number
9
· Pressing
This prevents misdialing when you redial or dial a stored number.
· Pressing
Setting the pause timing
You can set the pause timing to 3 seconds or 5 seconds, depending on your PBX requirements. The
factory preset is 3 seconds.
Make sure that the power is ON (p. 11) and the unit is in the stand-by mode.
1
Press
2
3
Press .
3
Enter the base unit password (p. 25).
· The factory preset is 0000.
4
3
Press .
· The current timing is displayed.
1: 3 seconds
Ex. 3 seconds is selected.
33u i
18/4/00 15:04 Page 23
if a pause is required for dialing with a PBX or to access a long
9
(PBX)
Phone number
once creates a pause.
more than once increases the length of the pause between numbers.
I NT
then .
2: 5 seconds
5
To select 5 seconds, press
OR
To select 3 seconds, press
6
Press .
· A confirmation tone sounds and the
display will return to the stand-by mode.
· If 5 beeps sound in step 3, the entered
password is incorrect. Enter the correct
password.
2
.
1
.
23