Slopes; Height Of Cut; Heavy Growth; Cutterblade Operation - Hayter Hayterette 005 Owner's Handbook Manual

OPERATING THE MOWER

Slopes

To prevent engine damage do not use the mower on
slopes greater than 20 degrees.

Height Of Cut

Move the height of cut lever sideways to disengage it
from the locking notch, then push forwards to lower or
pull backwards to raise the height of cut. Release the le-
into one of the seven notch settings.
Always select a height of cut to suit operating conditions.
Prevent engine overloading and blockages by avoiding
low cuts in long grass conditions. Be prepared to make
two cuts when the grass is long.

Heavy Growth

Always select the maximum height of cut setting to
prevent the engine overloading. Be prepared to make two
cuts when the grass is long.
To prevent damage to your lawn do not remove more
than one third of grass height in one cut.

Cutterblade Operation

to this machine. They are designed to swing on the
20
shoulder of the cutterblade bolt when encountering a
Keep cutterblades sharp and ensure they are secured
correctly.
Always stop the engine when a hidden obstruction
or excessive vibration is encountered. Disconnect the
spark plug lead and examine the cutting mechanism.
ALWAYS replace a damaged cutterblade - Refer to
"Maintenance".
Non Grassed Areas
When moving the mower across non-grassed areas, stop
the engine and set the mower to the maximum height of
cut to protect the cutting mechanism.
9