Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LevelOne HVE-9005
Summary of Contents for LevelOne HVE-9005
- Page 1 LevelOne User Manual HVE-9005 HDMI over Cat.5 Extender Kit...
-
Page 2: Table Of Contents
Safety and Notice The HVE-9005 HDMI Extender over Cat.5 Extender Kit has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the HVE-9005 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. -
Page 3: Introduction
The HVE-9005 HDMI Extender over Cat.5 Extender Kit boosts up your video/audio transmission distance up to 60m (198ft) in HDTV 1080p with 48-bit color depth. HVE-9005 also supports the most advanced 3D video format complaint with HDMI specification and therefore guarantees the highest 3D video compatibility on the market. -
Page 4: Specifications
SPECIFICATIONS Model Name HDMI over Cat.5 Extender Kit Model No. HVE-9005T HVE-9005R ProductName HDMI over Cat.5 Transmitter HDMI over Cat.5 Receiver HDMI compliance HDMI Deep Color, full 3D & 4K2K@30 HDCP compliance Video bandwidth Single-link 340MHz [10.2Gbps] Video support 480i / 480p / 720p / 1080i / 1080p60 HDMI over UTP 1080p@60 60m (198ft) [CAT5e] Audio support... -
Page 5: Package Contents
PACKAGE CONTENTS ● HVE-9005 ● IR blaster x 2 ● IR receiver x 2 ● Power Adapter x 2 ● User Manual CONNECTION DIAGRAM... -
Page 6: Panel Descriptions
PANEL DESCRIPTIONS ► Transmitter HVE-9005T Front Panel 1. Latch-locking power jack: Connect to 5V DC power supply 2. LED: Power indicator 3. HDMI IN: Connects to a HDMI source with a HDMI male-male cable 4. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster 5. - Page 7 Receiver ► HVE-9005R Front Panel 9. Latch-locking power jack: Connect to 5V DC power supply 10. LED: Power indicator 11. HDMI OUT: Connect to a HDMI display with a HDMI male-male cable 12. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster 13.
-
Page 8: Ir Pass-Through
IR PASS-THROUGH IR Extenders IR Blaster IR Receiver IR Sockets IR BLASTER: plug in the IR blaster to emit all IR command signals received from the IR receiver from the other end to control the devices corresponding to the IR signals. IR RECEIVER: plug in the IR receiver to receive all IR command signals from the IR remote controls of the corresponding devices. -
Page 9: Hdmi Pin Definition
HDMI PIN DEFINITION Type A (Receptacle) HDMI Pin 1 TMDS Data2+ Pin 11 TMDS Clock Shield Pin 2 TMDS Data2 Shield Pin 12 TMDS Clock– Pin 3 TMDS Data2– Pin 13 Pin 4 TMDS Data1+ Pin 14 Reserved (N.C. on device) Pin 5 TMDS Data1 Shield Pin 15... -
Page 10: Notice
NOTICE 1. All HDMI over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz UTP cable and ASTRODESIGN Video Signal Generator VG-859C & VG-870B. 2. Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders. Please check carefully before plugging in the IR extender to the respective IR sockets. -
Page 11: Warranty
WARRANTY The SELLER warrants the HVE-9005 HDMI Extender over Cat.5 Extender Kit free from defects in the material and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer. Should this product fail to be in good working order within 1 year...