Page 1
HVE-9006 User Manual HDMI Extender over CAT5e/6 CE marking is a certification mark that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards.
Introduction The HVE-9006 extends HDMI signal between Transmitter and Receiver over CATx cable. It supports 1080p@60Hz video signals up to 50 m including embedded multi-channel audio and HDCP 1.4. Built-in EDID make this product compatible with most display and source device, to ensure HDMI transmission.
Panel Description Transmitter (TX) DC 5V HDMI IN HDMI OUT CAT OUT IR IN IR OUT RESET ① CAT OUT: RJ45 connector with Green& Yellow indicators. Connect to Receiver over CATx cable. The Green indicator lights up when powered on. The Yellow indicator lights up when linked successfully between Transmitter and Receiver.
③ IR OUT: Connect with IR Emitter. ④ HDMI OUT: Connect to display. ⑤ EQ SETTING: After the system is connected, press this button three to six times repeatedly until the best image output. When the cable, source, or display is changed, or reset the output resolution, it is need to press this button repeatedly to ensure the best image.
Input: 100VAC~240VAC, 50/60Hz; Output: Power Supply 5VDC 1A Power 4W (Max) Consumption Work -10~55℃ Temperature Relative Humility 10%-90% Dimensions 66mm x 16.8 mm x66 mm (W*H*D) Weight Transmitter: 36g; Receiver: 38g Connection Diagram Catx Projector Display IR Emitter IR Emitter DC 5V IR Receiver Projector Remote...