HVE-0201 HDMI Extender via Fiber Channel User Manual V1.0...
Page 2
Introduction LevelOne HVE-0201 HDMI extender uses 2 cores fiber without any copper wire inside, where radio frequency interference phenomenon is literally ruled out, which shows the advantage of high performance and good signal quality as well as low cost. Optical...
Package Content – HVE-0201 (RX+TX) – Power Adapter (DC5V, 1.0A) – HDMI Cable – User Manual Hardware Description Dimension / Weight 95 x 145.8 x 25.8mm (W x D x H), 400g...
Front Panel Power Optical HDMI HDMI Fiber Source Sink Note: Signal between Source and Sink also referred to as the source(TX) and receiving(RX) devices Rear Panel HDMI Power Connector Jack Fiber...
Installation Put ‘TX’ module near to HDMI signal source, such as DVD players or computers. Put ‘RX’ module is near to HDMI sink, such as LCD TVs or Projectors. Connect two place by using multimode fiber of cores. Scour the all end face of fibers. (See Note 1) Plug in the fibers according to the indicated number.
Connection Diagram DVD Player HDMI Cable Multi-mode SC Fiber, 200m System Requirement HDMI Source (DVD player or PC) HDMI Sink (Monitor or Projector) 100~240VAC 50~60Hz 0.2A electricity...
Technical Specification Model HVE-0201 Max Length 200M, 62.5, 50/125 MMF 2-SC 1920 × 1080 Max Resolution HDCP Compliant CEC Compliant Max Power TX: 5V 3W, 600mA RX: 5V 3W, 600mA Consumption Power DC 5V, 1.0A 95 x 145.8 x 25.8mm (W x D x H)