Advertisement
SG-300 Manual
1. Before using the scale for the first time, check
the battery compartment and remove any plastic
insulation strips or packaging that may be in place to
prevent battery drainage during shipping/storage.
2. If you are replacing the batteries, make sure the
positive and negative contacts are properly aligned.
IV. Operation
1. Press the ON/TARE key to turn the scale on.
2. Once the start-up process completes and the scale
goes to zero you are ready to weigh.
3. Place the quantity to be weighed onto the weighing
spoon and hold it level and steady.
4. Wait a couple seconds for the display to stabilize
before taking a weight reading.
5. To turn the scale OFF, press and hold the ON/
TARE key.
V. Changing the Unit of Measure
1. Press the MODE key to change the scales displayed
unit of measure.
2. If the scale is turned off then back on, it will default
to the last unit used.
• SG-300: g (gram) oz (ounce)
VI. Using the Tare Feature
Use the Tare feature to re-zero the scale if necessary
1. Press the ON/TARE key briefly The display will then
reset to zero.
Advertisement
