System Information And Reset Tv; System Information; Reset Tv; Pc Settings - Toshiba L7300A Digital Series User Manual

System Information and Reset
TV

System Information

This feature can be used to check the version of software
currently installed. When in DTV mode, it includes
additional diagnostic information such as signal strength,
signal quality, centre frequency, modulation, etc.
a
In the Get Help menu, press
System Information.
b
Press OK to display the System Information.
System Information
TOSHIBA
Jan 19 2013
Software Version : xxxxxxxx
MBOOT Version : xxxxxxxx
AVERAGE
CH 25
WEAK
AVERAGE
CH 33
WEAK
AVERAGE
CH 67
WEAK
c
For information about the signal quality of a
particular multiplex, press
multiplex.
d
Press OK for a screen showing detailed technical
information about the selected multiplex.

Reset TV

Selecting Reset TV will reset all TV settings, including
saved channels, to their original factory values.
a
In the Installation menu, press
Reset TV.
b
Press OK to select. A screen will appear warning
that all settings will be lost. Press OK to continue.
When the set powers back on, the Quick Setup
screen will appear. Press OK to advance the setup
and perform an auto tune. (See "Quick Setup"
section on page 16.)
B / b to select
2013
GOOD
STRONG
GOOD
STRONG
GOOD
STRONG
B b
/ to select that
B / b to select

PC Settings

Horizontal and Vertical Position

Connect the PC (as shown in the 'Connecting a computer'
section) and ensure that a picture is showing on the
television screen. The picture position may now be
adjusted to suit personal preference.
a
Press
b
Press c and
press OK.
c
B b
Press /
< Display Settings
Auto Format
4:3 Stretch
Picture Position
PC Settings
d
Press B / b
adjust the settings.
< PC Settings
Horizontal Position
Vertical Position

Clock Phase

Sampling Clock
Reset
The Clock Phase matches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
a
In the Display Settings menu, press
select PC Settings and press OK.
b
B b
Press /
c
Press C / c
press OK.
77
CONTROLS AND FEATURES
and B / b to highlight Picture icon.
B / b to select Display Settings and
to select PC Setting and press OK.
On
Off
to select an option and press
0
0
0
0
Clock Phase
picture blur.
to select Clock Phase.
to adjust until the picture clears and
C / c to
B b
/ to