Tv Power On Control (Active Standby); Media Renderer Setup; Device Name Setup - Toshiba L7300A Digital Series User Manual

Device Registration Setup
Once a User Name has completed authentication, it is
stored in the TV along with the password. The upper limit
for the number of Use Names that can be remembered is
20. You can delete User Names that are stored in the TV.
a
In the Network menu, press
Network Device Setup and press OK.
b
Press B / b to select External Control Setup and
press OK.
c
B b
Press / to select Apps Control Profile and
press OK.
d
Press B / b to select Device Registration Setup
and press OK.
The Device Registration Setup screen will
appear and the list of Companion Device ID
managed by the TV will be displayed.
e
Press B / b to highlight the Companion Device
ID.
f
c B
Press and /
Delete buttons and press OK.
NOTE: When re-registering a device which has been
deleted from the list, registration must be carried out
again.
TV Power On Control (Active
Standby)
When the TV is connected to the home network via
Wireless LAN, with the TV Power On Control in Enabled,
your TV can be turned on by control from Apps.
a
In the Options menu, press
Management and press OK.
b
Press B / b to select TV Power On Control and
press c and B /
Standby).
NOTE:
• Depending on the device connected to the home
network, it may take a while for the TV to turn on.
• Depending on the device connected to the home
network, this feature may not work.
• If the unencrypted Wireless Setup is done, this feature
can not be used.
• The power consumption during Active Standby is more
than it during Normal Standby.
• After the change from Power On state to Active Standby,
there may be a period of several ten seconds which
does not receive the operation from a remote control or
external apparatus.
B b
/ to select
b
to select the Cancel, All, or
B b
/ to select Power
b to select Enabled (Active

Media Renderer Setup

The TV can be configured as a media renderer.
When operating as a media renderer, the TV displays
content provided by a media server.
The selection of the media is done by media controller.
The TV can play photo, movie, or audio files when
operating as a media renderer.
a
In the Network menu, press
Network Device Setup and press OK.
b
Press B / b
c and B /
If request comes from media controller, prompt will appear
and the Media Renderer function will start.
To exit the Media Renderer:
Press EXIT.
Terminology
DMS: Digital Media Server
DMR: Digital Media Renderer
DMC: Digital Media Controller
NOTE: You cannot use 3D function in operating as a
media renderer.

Device Name Setup

The TV's device name can be changed.
a
In the Network menu, press
Network Device Setup and press OK.
b
B b
Press /
press OK.
The Device Name Setup screen will appear.
c
Press B / b
OK. The Software Keyboard window will appear.
d
Input the Device Name by using the software
keyboard (see page 46). To save your setting,
press the GREEN button.
NOTE:
• The Device Name can be up to 15 characters
long.
• Only the 0-9, - and A-Z (uppercase only)
characters may be used for the device name.
e
Press b to highlight Done and press OK to save
your setting.
47
CONTROLS AND FEATURES
B b
/
to select Media Renderer and press
b to select On.
B / b
to select Device Name Setup and
to select Device Name and press
to select
to select