Using Intel ® Wireless Display; Intel ® Widi Device Name; Device List - Toshiba L7300A Digital Series User Manual

®
Using Intel Wireless Display
®
Intel Wireless Display (Intel
supported on this TV. You can use your TV as
second display for PC with Intel
Display.
a
Press QUICK to open the Quick Menu.
b
Press B / b to select Intel
A prompt will appear on the screen. Select Yes.
c
®
Launch the Intel
select "scan for available adaptors".
®
Intel WiDi device name and ID list will then be
displayed on the PC screen.
Select the TV which you wish to connect to.
"Connecting" will be shown on the TV.
d
Connecting your PC to your TV the first time
When selecting the Toshiba TV for the first time, a
4-digit or 8-digit code will appear on your TV
screen. This code needs to be inputted into your
computer to authenticate the connection.
If authentication has already taken place
"Connected to Intel
appear on screen.
e
®
After the Intel WiDi connection is completed, the
TV screen will mirror the content shown on the PC
screen (depend on PC's settings).
NOTE:
• When connecting Intel
turned on.
®
• When the Intel WiDi software is active, and the
Connection Type is set to Wireless, other applications
may not be usable.
®
• Intel WiDi device name of the TV can be changed from
®
the Intel WiDi software.
®
To exit Intel WiDi:
®
Exit Intel WiDi by pushing the disconnect button on Intel
WiDi software or by pressing EXIT on the TV remote
control.
NOTE: If the PC has been inactive for some time, the
®
Intel WiDi connection will be disconnected automatically.
®
WiDi) is
®
Wireless
®
WiDi and press OK.
WiDi software on your PC and
®
WiDi. Please Wait" will
®
WiDi, PC must have power
Intel ®
®
The TV's Intel
a
In the Network menu, press B / b to select
Network Device Setup and press OK.
b
Press B / b to select Intel
OK.
c
Press B / b to select Intel
and press OK.
d
Select Intel
The Software Keyboard window will appear.
e
Input the Intel
software keyboard (see page 46). Press the
GREEN button.
f
Highlight Done and press OK to save your setting.
Device List displays a list of MAC addresses for previously
connected device that have been connected before. The
maximum number that can be stored is 20.
If the list run out of space, the least-recently-used MAC
address will be deleted and the new MAC address added
automatically.
a
In the Intel
Device List and press OK.
Device List will appear.
The registered MAC Address can be deleted one by one
by pressing RED key in the List.
When doing so the following text can be seen "Do you
want to unregister this device? Yes/No" (default cursor is
"No").
®
61
CONTROLS AND FEATURES
WiDi Device Name
WiDi device name can be changed.
®
WiDi Setup and press
®
WiDi Device Name
®
WiDi Device Name and press OK.
®
WiDi device name by using the

Device List

®
WiDi Setup screen, highlight the