Adjusting 2D To 3D Depth; Setting The 3D Pin Code; Setting 3D Start Message - Toshiba L7300A Digital Series User Manual

Adjusting 2D to 3D Depth

You can adjust the level of 3D.
From the Menu:
a
In the 3D menu, press
Depth and press OK.
b
Press C / c to select 1, 2, 3, 4, or 5 and press OK.
The higher the number, the stronger the 3D effect.
From the Quick Menu:
a
Press QUICK to open the Quick Menu.
b
B b
Press / to select 3D Settings and press OK.
c
B b
Press / to select 2D to 3D Depth and press
OK.
d
Press C / c to select 1, 2, 3, 4, or 5 and press OK.
The higher the number, the stronger the 3D effect.
NOTE: Depending on the content, setting the 3D effect to
a high level may result in blurring of the image contours
and background.
If you experience any abnormal sensation or feel fatigue
or nausea when viewing 3D images, stop watching and
rest until the symptoms subside. Before viewing again,
adjust the 3D effect to a lower number and view at a level
at which the symptoms do not occur.
B b
/ to select 2D to 3D

Setting the 3D PIN code

A 3D PIN code is necessary for using 3D Safety Settings.
To enter a new PIN code:
a
In the 3D menu, press
press OK.
b
Press the number buttons to enter a 4-digit
number. Confirm the code.
NOTE: PIN code cannot be set to "0000".
To change or delete your PIN code:
a
In the 3D menu, press
press OK.
b
Press the number buttons to enter your 4-digit PIN
code.
c
Select Change PIN or Delete PIN and press OK.
NOTE:
• PIN code cannot be set to "0000".
• If PIN is deleted, 3D Safety Settings is greyed
out, and the settings are reset to the factory
default.

Setting 3D Start Message

When this feature is set to On, a message is displayed
onscreen when a 3D signal is received.
a
In the 3D menu, press
Settings and press OK.
b
Enter your 4-digit 3D PIN code.
c
B b
Press /
d
Press c and
29
CONTROLS AND FEATURES
B b
/ to select 3D PIN and
B b
/ to select 3D PIN and
B / b to select 3D Safety
to select 3D Start Message.
B / b to select On or Off.